Table of Contents
Installing a new exhaust system can significantly enhance your Miata’s performance and sound. The Fujitsubo Legalis R exhaust is a popular choice among enthusiasts for its quality and design. This guide will provide you with essential tips for a successful DIY installation.
Tools and Materials Needed
- Fujitsubo Legalis R Exhaust System
- Socket set
- Wrenches
- Jack and jack stands
- Safety goggles
- Gloves
- Exhaust hanger removal tool
- Anti-seize compound
Preparation Steps
Before starting the installation, it’s crucial to prepare your workspace and gather all necessary tools. Follow these steps to ensure a smooth process:
- Park your Miata on a flat surface and engage the parking brake.
- Use a jack to lift the rear of the car and secure it with jack stands.
- Put on safety goggles and gloves to protect yourself during the installation.
Removing the Old Exhaust
To install the Fujitsubo Legalis R exhaust, you must first remove the existing exhaust system. Here’s how to do it:
- Locate the bolts securing the exhaust to the headers and the mid-pipe.
- Use a socket set to remove these bolts. If they are rusted, apply penetrating oil and let it sit for a few minutes.
- Remove the exhaust hangers using the exhaust hanger removal tool. Be careful not to damage them as you will need them for the new exhaust.
- Once all bolts and hangers are removed, carefully take out the old exhaust system from the vehicle.
Installing the Fujitsubo Legalis R Exhaust
With the old exhaust removed, it’s time to install the new Fujitsubo Legalis R exhaust. Follow these steps:
- Begin by positioning the new exhaust system under the car.
- Align the exhaust with the mounting points and hangers.
- Start by attaching the mid-pipe to the headers. Use the provided bolts and apply anti-seize compound to prevent future rusting.
- Secure the exhaust to the hangers, making sure everything is aligned properly.
- Finally, attach the rear section of the exhaust, ensuring a snug fit.
Final Checks and Tips
After installing the new exhaust, it’s essential to perform some final checks:
- Double-check all bolts and connections to ensure they are tight.
- Start the engine and listen for any unusual noises that may indicate a leak.
- Take your Miata for a short drive to test the new exhaust and check for any signs of vibration or misalignment.
Maintenance Tips
To keep your Fujitsubo Legalis R exhaust in top condition, consider the following maintenance tips:
- Regularly check the exhaust system for any signs of wear or damage.
- Clean the exhaust tips to maintain their appearance and prevent rust.
- Reapply anti-seize compound to bolts during routine maintenance checks.
Conclusion
Installing a Fujitsubo Legalis R exhaust on your Miata can be a rewarding DIY project. By following these tips and steps, you can enhance your vehicle’s performance and enjoy a more exhilarating driving experience. Remember to take your time and ensure all components are properly installed for the best results.