Table of Contents
DIY RS5 2.9TT Intake Upgrade with Eventuri Kit: Installation Tips and Performance Results
The Audi RS5 2.9TT is a powerhouse of a vehicle, and upgrading its intake system can significantly enhance performance. The Eventuri intake kit is a popular choice among enthusiasts looking to optimize airflow and improve engine response. In this article, we will provide you with detailed installation tips and discuss the performance results you can expect from this upgrade.
Why Upgrade to Eventuri Intake?
The Eventuri intake system is designed specifically for the Audi RS5 2.9TT, offering several advantages over the stock intake. These include:
- Improved Airflow: The Eventuri kit features a unique carbon fiber design that enhances airflow efficiency.
- Weight Reduction: The lightweight materials used in the kit help reduce overall weight.
- Enhanced Sound: The intake provides a more aggressive engine sound, enhancing the driving experience.
- Easy Installation: The kit is designed for a straightforward installation process, making it accessible for DIY enthusiasts.
Tools Required for Installation
Before you begin the installation, gather the following tools to ensure a smooth process:
- Socket set (including extensions)
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Trim removal tools
- Cleaning cloths
Step-by-Step Installation Guide
Step 1: Preparation
Start by ensuring the vehicle is parked on a flat surface and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during installation.
Step 2: Remove the Stock Intake
Begin by removing the engine cover. Use the trim removal tools to carefully detach any clips holding the cover in place. Once removed, locate the stock intake system.
Disconnect the air intake hose from the throttle body by loosening the clamps with a screwdriver. Remove any additional sensors or hoses attached to the stock intake.
Unscrew the mounting bolts securing the stock intake box and carefully lift it out of the engine bay.
Step 3: Install the Eventuri Intake
Place the Eventuri intake system into the engine bay, ensuring it fits snugly into the designated area. Secure it using the mounting bolts provided in the kit.
Reconnect the air intake hose to the throttle body and tighten the clamps. Reattach any sensors or hoses that were previously disconnected.
Step 4: Final Checks
Before closing everything up, double-check all connections and ensure that everything is secured properly. Replace the engine cover and reattach any clips that were removed.
Step 5: Reconnect Battery and Test
Reconnect the negative battery terminal and start the engine. Listen for any unusual sounds and ensure the engine runs smoothly. Allow the engine to idle for a few minutes to ensure everything is functioning correctly.
Performance Results
After installing the Eventuri intake kit, many RS5 owners report noticeable improvements in performance. Key benefits include:
- Increased Horsepower: Many users experience a gain of around 10-15 horsepower.
- Improved Throttle Response: The enhanced airflow leads to a more responsive throttle.
- Better Fuel Efficiency: With optimized airflow, some drivers report improved fuel economy during normal driving conditions.
- Enhanced Engine Sound: The intake kit produces a more aggressive and sporty sound that many enthusiasts appreciate.
Conclusion
Upgrading to the Eventuri intake kit for the Audi RS5 2.9TT is a worthwhile investment for performance enthusiasts. The installation process is straightforward, and the performance benefits are significant. With improved airflow, increased horsepower, and a more aggressive sound, this upgrade can take your driving experience to the next level.
Remember to always follow safety precautions when working on your vehicle and consult a professional if you encounter any issues during installation.