Dodge Charger 5.7 Hemi Modifications: Installing a Comp Cams Stage 2 Cam for Enhanced Thrust and Torque

by

The Dodge Charger 5.7 HEMI is a powerful vehicle that has captivated car enthusiasts for years. One of the most effective ways to enhance its performance is through modifications, particularly the installation of a high-performance camshaft. In this article, we will focus on installing the Comp Cams Stage 2 Cam, which promises to boost thrust and torque significantly.

Understanding the Comp Cams Stage 2 Cam

The Comp Cams Stage 2 Cam is designed to optimize the performance of the 5.7 HEMI engine. It provides a balance of power and drivability, making it a popular choice among enthusiasts. This camshaft enhances the engine’s ability to breathe, allowing for improved airflow and increased horsepower.

Key Features of the Comp Cams Stage 2 Cam

  • Increased Lift: Higher lift allows for more air and fuel into the combustion chamber.
  • Longer Duration: Extended duration keeps the valves open longer, enhancing performance at higher RPMs.
  • Improved Thrust: Optimized for better low-end torque and overall thrust.

Preparation for Installation

Before diving into the installation process, it is crucial to gather all necessary tools and materials. Proper preparation will ensure a smooth and efficient installation.

  • Tools Required:
    • Socket set
    • Torque wrench
    • Engine hoist (if necessary)
    • Camshaft installation tool
  • Materials Needed:
    • Comp Cams Stage 2 Camshaft
    • New lifters
    • Camshaft oil
    • Gaskets and seals

Step-by-Step Installation Guide

Follow these steps to successfully install the Comp Cams Stage 2 Cam in your Dodge Charger 5.7 HEMI. Ensure that you have a clean workspace and all tools at hand.

  • Step 1: Disconnect the battery to prevent any electrical issues during installation.
  • Step 2: Remove the intake manifold to access the engine components.
  • Step 3: Take off the valve covers to expose the camshaft and lifters.
  • Step 4: Remove the old camshaft by following the manufacturer’s guidelines.
  • Step 5: Install the new Comp Cams Stage 2 Camshaft, ensuring proper alignment.
  • Step 6: Replace the lifters with new ones to match the camshaft specifications.
  • Step 7: Reassemble the valve covers and intake manifold, ensuring all gaskets are properly seated.
  • Step 8: Reconnect the battery and start the engine to check for any issues.

Post-Installation Checks

After installation, it is essential to perform a few checks to ensure everything is functioning correctly. This will help you avoid potential problems down the line.

  • Check for Leaks: Inspect all gaskets and seals for any signs of oil or coolant leaks.
  • Listen for Unusual Noises: Pay attention to the engine sounds during startup and idling.
  • Monitor Engine Performance: Take the vehicle for a test drive to assess improvements in thrust and torque.

Conclusion

Installing a Comp Cams Stage 2 Cam in your Dodge Charger 5.7 HEMI can significantly enhance its performance, providing increased thrust and torque. With the right preparation and attention to detail during installation, you can enjoy the benefits of improved engine performance for years to come.