Table of Contents
Installing the Eagle Stroker Kit can significantly enhance your engine’s performance, offering a horsepower increase of over 100 HP. This guide will walk you through each step of the installation process to ensure you achieve the desired results.
Tools and Materials Needed
- Eagle Stroker Kit
- Socket set
- Torque wrench
- Engine hoist
- Oil and oil filter
- Gasket set
- Timing chain and gears
- Coolant
- Safety goggles and gloves
Preparation Steps
Before you begin the installation, it is crucial to prepare your workspace and vehicle. Follow these steps:
- Park the vehicle on a level surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues.
- Remove the necessary components to access the engine, including the hood, air intake, and exhaust manifold.
Removing the Old Engine Components
To install the Eagle Stroker Kit, you must first remove the old engine components. Follow these steps carefully:
- Drain the engine oil and coolant.
- Remove the intake manifold and carburetor.
- Detach the exhaust headers.
- Take out the old pistons and crankshaft.
Installing the Eagle Stroker Kit
Once the old components are removed, you can begin installing the Eagle Stroker Kit. Follow these steps:
- Install the new crankshaft, ensuring it is properly aligned.
- Attach the new pistons, making sure to use the correct rings.
- Install the new timing chain and gears.
- Replace the oil pump and install a new oil filter.
Reassembling the Engine
After installing the Eagle Stroker Kit, it is time to reassemble the engine. Follow these steps:
- Reattach the exhaust headers and intake manifold.
- Reconnect the carburetor and air intake system.
- Fill the engine with new oil and coolant.
- Reconnect the battery and double-check all connections.
Testing the Installation
Before taking your vehicle on the road, it is essential to test the installation. Follow these steps:
- Start the engine and listen for any unusual noises.
- Check for leaks around the oil filter and coolant lines.
- Allow the engine to reach operating temperature and monitor the gauges.
Tuning the Engine
After confirming that everything is functioning correctly, you may need to tune the engine for optimal performance. Consider the following:
- Adjust the carburetor settings for the new engine configuration.
- Check the ignition timing and make necessary adjustments.
- Consider a professional dyno tune for maximum performance gains.
Final Thoughts
Installing the Eagle Stroker Kit can be a rewarding project that significantly boosts your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased horsepower.