Table of Contents
Installing a Borla Corvette exhaust system can significantly enhance your vehicle’s performance and sound. This step-by-step guide will walk you through the process, ensuring a smooth installation.
Tools and Materials Needed
- Socket wrench set
- Torque wrench
- Jack and jack stands
- Rubber mallet
- Exhaust hanger removal tool
- Safety glasses
- Work gloves
- New Borla exhaust system
Preparation Steps
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all the necessary tools and materials to avoid interruptions during the process.
Step 1: Raise the Vehicle
Using a jack, raise the rear of the Corvette and secure it with jack stands. This will provide you with enough space to work comfortably under the vehicle.
Step 2: Remove the Old Exhaust System
Start by removing the exhaust tips and any clamps securing the exhaust system. Use the socket wrench to detach the bolts connecting the exhaust to the headers and the mid-pipe.
Next, use the exhaust hanger removal tool to detach the hangers holding the exhaust in place. Carefully lower the old exhaust system and set it aside.
Step 3: Install the New Borla Exhaust System
Begin by positioning the new Borla exhaust system under the vehicle. Align it with the mounting points and hangers.
Secure the exhaust system to the headers using the provided bolts and ensure everything is tightened to the manufacturer’s specifications using the torque wrench.
Step 4: Attach the Exhaust Tips
Once the main exhaust system is secured, attach the exhaust tips. Make sure they are aligned properly for a clean look. Tighten the clamps to ensure they are securely fastened.
Step 5: Final Checks
Before lowering the vehicle, double-check all connections and bolts. Ensure that there are no loose parts and everything is properly aligned.
Step 6: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure the vehicle is stable.
Step 7: Test the Exhaust System
Start the engine and listen for any unusual sounds. Check for leaks around the connections. If everything sounds good, take the vehicle for a short test drive to experience the new sound and performance.
Conclusion
Installing a Borla Corvette exhaust system can greatly enhance your driving experience. By following these steps, you can ensure a successful installation and enjoy the benefits of improved performance and sound.