Table of Contents
The Edelbrock Axle-back Exhaust System is a popular choice for car enthusiasts looking to enhance their vehicle’s performance and sound. This guide provides a step-by-step approach to installing the system, making it accessible for beginners.
Tools and Materials Needed
- Socket wrench set
- Jack and jack stands
- Rubber mallet
- Torque wrench
- Exhaust hangers
- Safety goggles
- Gloves
- Edelbrock Axle-back Exhaust System
Preparation
Before starting the installation, ensure that your vehicle is parked on a level surface. Engage the parking brake and wear safety goggles and gloves for protection. Gather all necessary tools and materials.
Step 1: Lift the Vehicle
Using a jack, lift the rear of the vehicle and securely place it on jack stands. This will provide enough clearance to work comfortably under the vehicle.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system. Using the socket wrench, remove the bolts connecting the exhaust to the catalytic converter. Carefully detach the exhaust hangers using a rubber mallet if necessary.
Step 3: Install the Edelbrock Axle-back Exhaust System
Begin by positioning the Edelbrock axle-back exhaust system in place. Align it with the existing mounting points. Ensure the exhaust tips are positioned correctly for optimal appearance.
Step 4: Secure the Exhaust System
Attach the exhaust system to the mounting points using the provided bolts. Tighten the bolts securely with the socket wrench, ensuring a snug fit without over-tightening.
Step 5: Reattach Exhaust Hangers
Reinstall the exhaust hangers to secure the exhaust system in place. Make sure they are properly aligned and seated to prevent any rattling or movement.
Step 6: Lower the Vehicle
Once everything is securely in place, carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure everything is clear before starting the engine.
Step 7: Test the Exhaust System
Start the engine and let it idle for a few minutes. Listen for any unusual noises and check for leaks around the connections. If everything sounds and looks good, you have successfully installed the Edelbrock axle-back exhaust system!
Conclusion
Installing the Edelbrock Axle-back Exhaust System can significantly enhance your vehicle’s performance and sound. By following this step-by-step guide, even beginners can tackle the installation with confidence. Enjoy your new exhaust system!