Table of Contents
The Mitsubishi Lancer Evolution 8, commonly known as the Evo 8, is a beloved vehicle among car enthusiasts and performance tuners. One of the most effective ways to increase the power and efficiency of the Evo 8 is through the installation of high-quality intake and exhaust systems. In this article, we will explore how to boost the performance of your Evo 8 using Greddy components, and we will guide you through the installation process that can be completed in just three hours.
Why Upgrade Your Intake and Exhaust?
Upgrading the intake and exhaust systems of your Evo 8 can lead to significant performance gains. Here are some key benefits:
- Increased horsepower: A high-flow intake and exhaust system allows for better airflow, resulting in more power.
- Improved throttle response: Enhanced airflow can lead to quicker engine response, making the car more fun to drive.
- Better fuel efficiency: With optimized airflow, the engine can run more efficiently, potentially improving fuel economy.
- Enhanced sound: Upgraded exhaust systems can provide a more aggressive and sporty sound.
Tools and Materials Needed
Before starting the installation, gather the necessary tools and materials. Here’s what you’ll need:
- Greddy intake system
- Greddy exhaust system
- Socket set
- Wrenches
- Screwdrivers
- Jack and jack stands
- Safety glasses
- Torque wrench
- Shop towels
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your Evo 8 on a flat surface and engaging the parking brake. Use a jack to lift the front of the vehicle and secure it with jack stands. This will provide you with easy access to the undercarriage for exhaust installation.
Step 2: Remove the Stock Intake
Begin by removing the stock intake system. Disconnect the air intake duct from the throttle body and remove any clamps securing the intake. Carefully take out the air filter and intake tube. Make sure to keep all screws and clamps as you will need them for the new installation.
Step 3: Install the Greddy Intake
Now, it’s time to install the Greddy intake system. Follow these steps:
- Position the Greddy intake tube and align it with the throttle body.
- Secure the intake tube using the original clamps and screws.
- Install the Greddy air filter onto the intake tube, ensuring it is tightly secured.
Step 4: Remove the Stock Exhaust
Next, move on to the exhaust system. Start by removing the stock exhaust. This involves:
- Disconnecting the exhaust hangers.
- Removing the bolts securing the exhaust to the catalytic converter.
- Carefully taking out the entire stock exhaust system from the vehicle.
Step 5: Install the Greddy Exhaust
With the stock exhaust removed, you can now install the Greddy exhaust system:
- Position the Greddy exhaust in place, aligning it with the catalytic converter.
- Secure the exhaust using the provided bolts, ensuring they are tightened to the manufacturer’s specifications.
- Reattach the exhaust hangers to the chassis.
Step 6: Final Checks
Once both the intake and exhaust systems are installed, double-check all connections and fittings. Make sure everything is secure and properly aligned. It’s important to ensure that there are no leaks in the exhaust system.
Step 7: Lower the Vehicle and Test
Carefully lower the vehicle back to the ground and start the engine. Listen for any unusual sounds and check for leaks. Take your Evo 8 for a test drive to experience the improvements in power and throttle response.
Conclusion
Upgrading your Evo 8’s intake and exhaust systems with Greddy components is a fantastic way to enhance performance and driving experience. With just a few hours of work, you can unlock the full potential of your vehicle. Remember to follow all safety guidelines during the installation and enjoy the newfound power of your Evo 8!