Table of Contents
The BMW F87 M2 is a performance-oriented vehicle that has captured the hearts of enthusiasts around the world. One of the most effective ways to enhance its power and performance is through turbocharger upgrades. In this article, we will explore the benefits of installing a Pure Turbos kit, specifically designed to push the power output beyond 550 horsepower.
Understanding the F87 M2 Turbocharger System
The F87 M2 comes equipped with a single twin-scroll turbocharger that provides a good balance of power and efficiency. However, for those seeking more performance, upgrading the turbocharger is essential. The stock turbocharger can limit the vehicle’s potential, especially when modifications are made to increase airflow and engine output.
Benefits of Upgrading to a Pure Turbos Kit
Upgrading to a Pure Turbos kit offers several advantages:
- Increased Power Output: The Pure Turbos kit can deliver over 550 horsepower, significantly enhancing the driving experience.
- Improved Throttle Response: Upgraded turbochargers improve spool time, leading to quicker acceleration.
- Enhanced Reliability: Pure Turbos are designed for high performance, ensuring durability under increased stress.
- Better Tuning Capabilities: The kit allows for more aggressive tuning options, maximizing performance gains.
Preparing for the Installation
Before diving into the installation process, it is crucial to gather the necessary tools and materials. Here’s a checklist of what you will need:
- Basic hand tools (sockets, wrenches, screwdrivers)
- Torque wrench
- Jack and jack stands
- Coolant and oil for refilling
- Pure Turbos kit (including turbochargers and hardware)
- Performance intercooler (optional but recommended)
Step-by-Step Installation Guide
Step 1: Prepare the Vehicle
Begin by parking the vehicle on a flat surface and securing it with jack stands. Disconnect the battery to ensure safety during the installation process.
Step 2: Remove the Stock Turbocharger
To access the stock turbocharger, remove the intake manifold and any components obstructing access. Carefully detach the stock turbocharger from the exhaust manifold and intake piping. Make sure to keep track of all bolts and connectors for reinstallation.
Step 3: Install the Pure Turbos Kit
Position the new Pure Turbos turbochargers onto the exhaust manifold. Ensure that all gaskets are properly aligned to prevent leaks. Tighten all bolts to the manufacturer’s specifications using a torque wrench.
Step 4: Reassemble the Components
Reinstall the intake manifold and any other components that were removed earlier. Ensure that all connections are secure and that no tools are left in the engine bay.
Step 5: Reconnect the Battery and Start the Engine
Reconnect the battery and start the engine. Allow the engine to idle for a few minutes while checking for any leaks or unusual sounds. If everything appears normal, take the vehicle for a test drive to experience the enhanced performance.
Tuning Your F87 M2 After Installation
After installing the Pure Turbos kit, proper tuning is essential to maximize performance. Consider the following:
- ECU Remapping: A custom ECU tune will ensure that the engine runs efficiently with the new turbochargers.
- Monitoring Performance: Use performance monitoring tools to track boost levels, air-fuel ratios, and engine temperatures.
- Regular Maintenance: Keep up with regular maintenance to ensure the longevity of your upgrades.
Conclusion
Upgrading the turbocharger on your F87 M2 with a Pure Turbos kit can unlock significant power and performance. With careful installation and proper tuning, you can enjoy a thrilling driving experience. Always remember to follow best practices for maintenance to keep your vehicle running at its best.