Table of Contents
If you own a Toyota Tundra TRD Pro, you know the importance of maintaining optimal performance and stability. One of the most effective ways to enhance both is by installing a Fabtech Leveling Kit. This guide will walk you through the installation process and highlight the benefits of elevating your truck.
What is a Fabtech Leveling Kit?
A Fabtech Leveling Kit is designed to raise the front of your Toyota Tundra to match the height of the rear. This adjustment not only improves the vehicle’s stance but also enhances the overall driving experience.
Benefits of Installing a Leveling Kit
- Improved Stability: A leveling kit helps distribute weight evenly, improving handling and stability on various terrains.
- Enhanced Aesthetics: Elevating the front of the truck gives it a more aggressive and appealing look.
- Increased Ground Clearance: This allows for better off-road capabilities and protection of the undercarriage.
- Better Tire Clearance: Installing larger tires is easier with a leveling kit, providing better traction and performance.
- Boosted Performance: Elevating your Tundra can lead to an increase in horsepower, enhancing overall performance.
Tools and Materials Needed
- Fabtech Leveling Kit
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Wheel chocks
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation, ensure you have all the necessary tools and materials. Follow these preparation steps:
- Park the Tundra on a flat surface.
- Engage the parking brake and place wheel chocks behind the rear tires.
- Wear safety glasses and gloves for protection.
Installation Process
Step 1: Remove the Front Wheels
Using a jack, lift the front of your Tundra and secure it with jack stands. Remove the front wheels using a socket set.
Step 2: Disconnect the Sway Bar Links
Locate the sway bar links and use a wrench to disconnect them from the lower control arms. This step is crucial for allowing the suspension to flex during installation.
Step 3: Remove the Strut Assembly
Unbolt the strut assembly from the lower control arm and the top of the strut tower. Carefully remove the strut assembly from the vehicle.
Step 4: Install the Leveling Kit Spacer
Place the leveling kit spacer on top of the strut assembly. Align the holes and secure it with the provided hardware. Ensure everything is tightened to the manufacturer’s specifications.
Step 5: Reinstall the Strut Assembly
Carefully reinstall the strut assembly back into the vehicle, securing it to the lower control arm and the strut tower. Reattach the sway bar links.
Step 6: Reinstall the Front Wheels
Put the front wheels back on and hand-tighten the lug nuts. Lower the vehicle back to the ground and then use a torque wrench to tighten the lug nuts to the recommended specifications.
Final Checks and Adjustments
After installation, it’s important to perform a few final checks:
- Inspect all bolts and connections to ensure they are secure.
- Check the alignment of the wheels and adjust if necessary.
- Take the Tundra for a test drive to ensure everything is functioning properly.
Conclusion
Installing a Fabtech Leveling Kit on your Toyota Tundra TRD Pro is a straightforward process that can significantly enhance the vehicle’s performance, stability, and appearance. With the right tools and careful attention to detail, you can elevate your truck and enjoy the benefits of improved handling and increased horsepower.