Table of Contents
The Subaru Forester is known for its versatility and performance, but for those looking to enhance their driving experience, upgrading to a TurboXS Turbocharger can provide a significant boost in power. This article will guide you through the installation process, ensuring you can achieve up to 320 horsepower with your Forester.
Why Upgrade to a TurboXS Turbocharger?
Upgrading to a TurboXS Turbocharger not only increases horsepower but also enhances overall engine performance. Here are some reasons to consider this modification:
- Increased Power: Achieve up to 320 horsepower.
- Improved Torque: Better acceleration and responsiveness.
- Enhanced Engine Efficiency: More power without sacrificing fuel economy.
- Better Driving Experience: Enjoy a sportier and more engaging ride.
Tools and Materials Needed
Before starting the installation, gather the necessary tools and materials to ensure a smooth process. Here’s what you will need:
- TurboXS Turbocharger Kit
- Basic Hand Tools (wrenches, sockets, screwdrivers)
- Torque Wrench
- Intercooler Piping
- Vacuum Lines
- Oil and Coolant
- Gaskets and Seals
- Safety Gear (gloves, goggles)
Step-by-Step Installation Process
Step 1: Prepare Your Vehicle
Begin by ensuring your Forester is parked on a flat surface. Disconnect the battery to prevent any electrical issues during the installation.
Step 2: Remove the Stock Turbocharger
To install the TurboXS Turbocharger, you need to remove the stock turbo. Follow these steps:
- Remove the air intake system.
- Disconnect the exhaust downpipe from the stock turbo.
- Unbolt the turbo from the manifold.
- Carefully lift the stock turbo out of the engine bay.
Step 3: Install the TurboXS Turbocharger
With the stock turbo removed, it’s time to install the TurboXS Turbocharger:
- Position the TurboXS Turbocharger onto the manifold.
- Secure it using the provided bolts, ensuring they are torqued to the manufacturer’s specifications.
- Connect the exhaust downpipe to the new turbo.
- Install any necessary gaskets and seals to prevent leaks.
Step 4: Reconnect the Intake and Vacuum Lines
After securing the turbo, reconnect the air intake system and any vacuum lines that were disconnected during the removal process:
- Attach the intercooler piping to the turbo.
- Reconnect the air filter and intake tubing.
- Ensure all vacuum lines are properly connected and secure.
Step 5: Fill Fluids and Reconnect the Battery
Before starting the engine, fill the oil and coolant to the appropriate levels. Once everything is in place, reconnect the battery.
Step 6: Start the Engine and Check for Leaks
With everything installed, it’s time to start your Forester:
- Start the engine and allow it to idle for a few minutes.
- Check for any leaks around the turbo and connections.
- Listen for unusual noises that may indicate installation issues.
Tuning Your Forester
After installation, it is crucial to tune your vehicle to maximize the performance of the TurboXS Turbocharger. Consider the following:
- Use a professional tuning service to adjust your ECU settings.
- Monitor air-fuel ratios for optimal performance.
- Consider upgrading your fuel system if necessary.
Conclusion
Upgrading your Subaru Forester with a TurboXS Turbocharger is a fantastic way to enhance its performance and driving experience. By following the steps outlined in this guide, you can achieve an impressive 320 horsepower, making your Forester a true powerhouse on the road. Always remember to tune your vehicle properly to ensure reliability and performance longevity.