Table of Contents
The Nissan GT-R is renowned for its performance and tuning potential, making it a favorite among car enthusiasts. One of the key upgrades for those looking to push their GT-R to the next level is the fuel injector. Upgrading fuel injectors is crucial when aiming for high horsepower levels, especially if you’re targeting 700 WHP. In this article, we will discuss the importance of fuel injector upgrades, the types available, and provide installation tips for a successful upgrade.
Why Upgrade Your Fuel Injectors?
Upgrading fuel injectors is essential for several reasons:
- Increased Fuel Flow: Higher horsepower requires more fuel. Stock injectors may not be able to provide the necessary flow for 700 WHP.
- Better Fuel Atomization: Upgraded injectors improve fuel atomization, which can enhance combustion efficiency.
- Improved Throttle Response: Larger injectors can provide better throttle response, leading to a more engaging driving experience.
- Support for Additional Modifications: If you plan to add more performance mods, upgraded injectors will help support those changes.
Types of Fuel Injectors for Nissan GT-R
When considering fuel injector upgrades for your GT-R, you’ll find several types available:
- High-Flow Injectors: These injectors are designed to deliver more fuel than stock options, making them ideal for high horsepower builds.
- Injector Dynamics: Known for their precision and performance, these injectors are a popular choice among tuners.
- Bosch Fuel Injectors: Bosch offers a range of injectors that are compatible with the GT-R and provide reliable performance.
- Top Feed vs. Side Feed: Depending on your fuel rail setup, you may choose between top-feed injectors or side-feed injectors.
Choosing the Right Injector Size
Selecting the right injector size is critical for achieving your performance goals. Here are some guidelines:
- Calculate Your Horsepower Needs: A general rule is to have 1 injector per 100 WHP. For 700 WHP, consider injectors rated for at least 700 cc/min.
- Consider Fuel Type: If using E85, you may need larger injectors due to its lower energy content compared to gasoline.
- Consult with Tuners: Speak with experienced tuners who can provide advice based on your specific setup and goals.
Installation Tips for Fuel Injectors
Installing new fuel injectors can be a straightforward process if done correctly. Here are some tips to ensure a successful installation:
- Gather Necessary Tools: Make sure you have all the tools required, including a ratchet set, torque wrench, and fuel line disconnect tools.
- Relieve Fuel Pressure: Before starting, relieve the fuel pressure to avoid spills. Disconnect the fuel pump fuse and crank the engine.
- Remove the Intake Manifold: This step may be necessary to access the fuel rail and injectors. Follow your service manual for guidance.
- Replace O-Rings: Always replace the O-rings on new injectors to ensure a proper seal and prevent leaks.
- Torque Specifications: Follow the manufacturer’s torque specifications when reinstalling the fuel rail and manifold.
- Check for Leaks: After installation, turn the ignition on without starting the engine to check for any fuel leaks.
Tuning After Injector Upgrade
Once you have installed your new fuel injectors, tuning is essential to maximize performance:
- ECU Calibration: Your ECU will need to be recalibrated to accommodate the new injector flow rates.
- Air-Fuel Ratio Monitoring: Monitor your air-fuel ratios to ensure optimal performance and avoid running lean.
- Dyno Testing: Consider a dyno session to fine-tune your setup and achieve the best performance.
Conclusion
Upgrading the fuel injectors on your Nissan GT-R is a vital step toward achieving high horsepower goals. By selecting the right injectors, following proper installation procedures, and tuning your vehicle accordingly, you can unlock the full potential of your GT-R and enjoy an exhilarating driving experience. Whether you’re a seasoned tuner or a newcomer, these tips will help you navigate the upgrade process with confidence.