Table of Contents
The G70 3.3T is known for its impressive performance and sleek design, but one area that can significantly enhance its driving experience is the braking system. Upgrading to Brembo brakes can provide better stopping power, improved pedal feel, and increased safety. In this article, we will explore the benefits of installing Brembo brakes on your G70 3.3T and provide a step-by-step guide on how to perform the upgrade.
Why Upgrade to Brembo Brakes?
Brembo is a renowned brand in the automotive world, especially known for its high-performance braking systems. Here are some reasons why upgrading to Brembo brakes is a smart choice for your G70 3.3T:
- Enhanced Stopping Power: Brembo brakes are designed to deliver superior stopping performance, allowing for quicker and more controlled stops.
- Improved Heat Dissipation: The materials and design of Brembo brakes help to dissipate heat more effectively, reducing brake fade during aggressive driving.
- Better Pedal Feel: Upgraded brake components provide a more responsive and comfortable pedal feel, enhancing overall driving confidence.
- Durability: Brembo brakes are built to last, ensuring that your investment pays off in both performance and longevity.
Tools and Materials Needed
Before you begin the installation process, gather the following tools and materials:
- Socket set
- Torque wrench
- Brake cleaner
- Brake fluid
- Brembo brake kit (calipers, rotors, pads)
- Jack and jack stands
- Wheel chocks
- Gloves and safety glasses
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your G70 3.3T on a flat surface and engaging the parking brake. Place wheel chocks behind the rear wheels to prevent any movement.
Step 2: Remove the Wheels
Using a socket set, loosen the lug nuts on the front wheels. Once loosened, lift the front of the vehicle using a jack and secure it with jack stands. Remove the lug nuts completely and take off the wheels.
Step 3: Remove the Old Brake Components
Locate the brake caliper and remove the bolts securing it to the bracket using the appropriate socket. Carefully slide the caliper off the rotor and hang it using a bungee cord to avoid damaging the brake line. Next, remove the old brake pads and rotor.
Step 4: Install the New Brembo Rotor
Place the new Brembo rotor onto the hub, ensuring it is seated properly. Secure it using the original rotor screws, if applicable.
Step 5: Install the New Brake Pads
Insert the new Brembo brake pads into the caliper bracket. Make sure they are aligned correctly and seated firmly.
Step 6: Reattach the Caliper
Carefully slide the caliper over the new brake pads and rotor. Align the caliper with the mounting bracket and tighten the bolts securely using a torque wrench to the manufacturer’s specifications.
Step 7: Repeat for the Other Side
Follow the same steps to remove and replace the brake components on the other front wheel.
Step 8: Reinstall the Wheels
Once both sides are complete, place the wheels back onto the hubs and hand-tighten the lug nuts. Lower the vehicle and then use a torque wrench to tighten the lug nuts to the specified torque.
Step 9: Bleed the Brakes
To ensure optimal performance, bleed the brake system to remove any air. Start from the furthest brake from the master cylinder and work your way to the closest. Follow the proper bleeding procedure for your vehicle.
Step 10: Test Drive
After completing the installation, take your G70 3.3T for a test drive. Pay attention to the braking performance and ensure everything feels right. If there are any unusual sounds or issues, recheck your installation.
Conclusion
Upgrading to Brembo brakes on your G70 3.3T can greatly enhance your driving experience by providing improved stopping power, better heat dissipation, and a more responsive pedal feel. By following this step-by-step guide, you can confidently install your new brake system and enjoy the benefits it brings to your performance vehicle.