Table of Contents
The Genesis G70 3.3T is a powerful sedan that has garnered attention for its performance capabilities. To enhance its performance further, many enthusiasts turn to aftermarket modifications. One popular upgrade is the installation of a CTS Turbo intercooler, which can significantly improve intake temperatures and overall power output.
Understanding the Importance of an Intercooler
An intercooler plays a critical role in forced induction systems. It cools the air that enters the engine, allowing for denser air, which leads to improved combustion and power. In the case of the G70 3.3T, the factory intercooler may not be sufficient for high-performance applications, especially when tuning or adding more boost.
Benefits of Upgrading to a CTS Turbo Intercooler
The CTS Turbo intercooler is designed to provide several advantages over the stock unit:
- Improved Cooling Efficiency: The larger core provides better heat dissipation.
- Reduced Intake Temperatures: Cooler air leads to enhanced performance and throttle response.
- Increased Power Output: More power can be achieved with a more efficient intercooler.
- Durability: Built with high-quality materials to withstand increased boost levels.
Tools Required for Installation
Before beginning the installation of the CTS Turbo intercooler, ensure you have the following tools on hand:
- Socket set (including deep sockets)
- Wrenches
- Screwdrivers (flathead and Phillips)
- Torque wrench
- Trim removal tools
- Intercooler piping (if necessary)
Step-by-Step Installation Guide
1. Preparation
Begin by parking your G70 on a flat surface and ensuring the engine is cool. Disconnect the battery to prevent any electrical issues during the installation.
2. Remove the Front Bumper
To access the intercooler, the front bumper needs to be removed. Carefully unclip and unscrew the fasteners holding the bumper in place. Make sure to keep track of all screws and clips for reinstallation.
3. Remove the Stock Intercooler
Once the bumper is off, locate the stock intercooler. Disconnect the piping and any sensors attached to it. Remove the mounting bolts and take out the stock intercooler carefully.
4. Install the CTS Turbo Intercooler
Position the CTS Turbo intercooler in place. Secure it with the original mounting bolts. Reconnect the piping and sensors, ensuring all connections are tight and leak-free.
5. Reinstall the Front Bumper
After the intercooler is securely installed, carefully reattach the front bumper. Ensure all clips and screws are secured properly to avoid any loose parts while driving.
6. Reconnect the Battery
Once everything is back in place, reconnect the battery. Start the engine and check for any leaks or irregular sounds that might indicate an installation issue.
Tuning After Installation
After installing the CTS Turbo intercooler, it’s advisable to have the vehicle tuned. A proper tune will optimize the air-fuel mixture and boost levels, maximizing the performance benefits of the new intercooler.
Conclusion
Upgrading to a CTS Turbo intercooler is a worthwhile modification for the Genesis G70 3.3T. Not only does it enhance performance by lowering intake temperatures, but it also helps in achieving better power output. With the right tools and careful installation, this mod can significantly elevate your driving experience.