G72 Twin Turbo Kit Installation Guide: Upgrading Your Engine with Ams Performance

by

Upgrading your engine can significantly enhance your vehicle’s performance, and the G72 Twin Turbo Kit from AMS Performance is a fantastic choice for those looking to boost their horsepower and torque. This guide will walk you through the installation process step-by-step, ensuring a smooth upgrade experience.

Tools and Materials Needed

  • G72 Twin Turbo Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Oil and coolant
  • Heat-resistant gloves
  • Safety glasses

Preparation Steps

Before starting the installation, it’s essential to prepare your workspace and vehicle. Follow these steps to ensure everything is ready:

  • Park your vehicle on a level surface and engage the parking brake.
  • Disconnect the battery to avoid any electrical issues.
  • Remove any components obstructing access to the engine bay, such as the intake system.
  • Gather all tools and materials in your workspace for easy access.

Step-by-Step Installation Process

1. Remove the Stock Turbochargers

Begin by removing the stock turbochargers. Follow these sub-steps:

  • Disconnect the oil and coolant lines from the stock turbos.
  • Unbolt the turbos from the manifold.
  • Carefully lift the turbos out of the engine bay.

2. Install the G72 Turbochargers

With the stock turbos removed, it’s time to install the G72 turbochargers:

  • Position the G72 turbochargers onto the manifold.
  • Secure the turbos with the supplied bolts, ensuring they are torqued to specifications.
  • Reconnect the oil and coolant lines to the new turbos.

3. Install the Intercooler and Piping

Next, install the intercooler and the associated piping:

  • Position the intercooler in the designated area, ensuring proper alignment.
  • Connect the piping from the turbos to the intercooler.
  • Secure all connections with the provided clamps.

4. Connect the Intake System

Now, it’s time to connect the intake system:

  • Attach the intake pipes to the turbochargers.
  • Ensure all connections are tight and secure.
  • Reconnect any sensors or electrical components that were removed.

5. Reconnect the Battery and Start the Engine

After everything is installed, reconnect the battery:

  • Double-check all connections and bolts for security.
  • Reconnect the battery terminals.
  • Start the engine and check for leaks or abnormal noises.

Tuning Your Engine

After installation, it’s crucial to tune your engine to maximize performance:

  • Use a professional tuner to adjust the engine management system.
  • Ensure the air-fuel ratio is optimal for the new turbo setup.
  • Test drive the vehicle to evaluate performance improvements.

Maintenance Tips

To ensure longevity and performance of your G72 Twin Turbo Kit, follow these maintenance tips:

  • Regularly check for oil and coolant leaks.
  • Inspect all connections and hoses for wear.
  • Change the oil and filter at recommended intervals.
  • Monitor engine performance and address any issues promptly.

Conclusion

The G72 Twin Turbo Kit from AMS Performance is an excellent way to enhance your vehicle’s performance. By following this installation guide and maintaining your system properly, you can enjoy the benefits of increased horsepower and torque for many miles to come.