Table of Contents
The G87 M2 is a remarkable performance vehicle, but for enthusiasts looking to enhance its handling and ride quality, upgrading to H&R Sport Springs can make a significant difference. This guide will walk you through the installation process and the benefits of this upgrade.
Benefits of H&R Sport Springs
Upgrading to H&R Sport Springs offers several advantages for G87 M2 owners:
- Improved Handling: H&R Sport Springs lower the vehicle’s center of gravity, which enhances cornering stability and responsiveness.
- Enhanced Ride Quality: These springs are designed to provide a comfortable ride while still offering sporty performance.
- Better Aesthetics: Lowering your vehicle gives it a more aggressive stance, improving its overall appearance.
- Increased Performance: With better handling and ride quality, you’ll experience a more engaging driving experience.
Tools and Materials Needed
Before beginning the installation, gather the following tools and materials:
- Jack and jack stands
- Socket set
- Torque wrench
- Screwdriver set
- Spring compressor (optional, but recommended)
- H&R Sport Springs
Installation Steps
Step 1: Preparation
Ensure your vehicle is parked on a flat surface and the engine is off. Engage the parking brake and gather all necessary tools.
Step 2: Lifting the Vehicle
Using the jack, lift the front or rear of the vehicle as needed, and securely place jack stands under the vehicle to ensure safety during the installation.
Step 3: Removing the Stock Springs
Remove the wheels to access the suspension components. Then, carefully unbolt the strut assembly from the vehicle. If necessary, use a spring compressor to safely remove the stock springs from the strut assembly.
Step 4: Installing H&R Sport Springs
Place the H&R Sport Springs onto the strut assembly. Ensure they are seated properly and then reassemble the strut back onto the vehicle. Torque all bolts to the manufacturer’s specifications.
Step 5: Reinstalling the Wheels
Once the new springs are installed, reinstall the wheels and hand-tighten the lug nuts. Lower the vehicle back to the ground and then torque the lug nuts to the specified settings.
Step 6: Final Checks
After installation, check that all components are secure and that there are no unusual noises when driving. It’s recommended to have a professional alignment done after lowering your vehicle to ensure optimal handling and tire wear.
Conclusion
Installing H&R Sport Springs on your G87 M2 is a straightforward process that can yield significant improvements in handling and ride quality. With the right tools and a bit of patience, you can elevate your driving experience to new heights.