Garrett Gt3071r Installation Guide: Boost Your Subaru Wrx’s Performance

by

If you’re looking to enhance the performance of your Subaru WRX, installing a Garrett GT3071R turbocharger is a fantastic upgrade. This guide will walk you through the installation process step by step, ensuring you achieve optimal results.

Tools and Materials Needed

  • Garrett GT3071R Turbocharger
  • Turbocharger installation kit
  • Socket set
  • Torque wrench
  • Wrenches (various sizes)
  • Oil drain line
  • Coolant lines
  • Silicone couplers and clamps
  • Intercooler (if upgrading)
  • Boost gauge
  • Fuel pump upgrade (if necessary)

Preparation Steps

Before you begin the installation, make sure to prepare your workspace and gather all necessary tools and materials. Follow these preparation steps:

  • Park your Subaru WRX on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues during installation.
  • Remove the engine cover and any components obstructing access to the turbocharger.

Removing the Stock Turbocharger

To install the Garrett GT3071R, you must first remove the stock turbocharger. Follow these steps:

  • Disconnect the intake piping from the stock turbocharger.
  • Remove the exhaust downpipe connected to the turbo.
  • Detach the oil feed and drain lines from the stock turbocharger.
  • Unbolt the turbocharger from the manifold and carefully remove it from the engine bay.

Installing the Garrett GT3071R

Now that the stock turbo is out, it’s time to install the Garrett GT3071R. Follow these steps for a successful installation:

  • Position the Garrett GT3071R turbocharger onto the manifold and secure it with the provided bolts.
  • Reconnect the oil feed line, ensuring it’s tightened to prevent leaks.
  • Install the oil drain line, making sure it has a proper slope for drainage.
  • Attach the coolant lines to the turbo, ensuring they are secure.
  • Connect the exhaust downpipe to the turbocharger and tighten the bolts.
  • Reconnect the intake piping to the turbo, making sure all couplers are secure.

Finalizing the Installation

With the turbocharger installed, it’s time to finalize the installation. Follow these steps:

  • Reinstall any components that were removed to access the turbocharger.
  • Reconnect the battery and check all connections for tightness.
  • Install a boost gauge to monitor the new turbo’s performance.
  • If necessary, upgrade the fuel pump to support the increased power.

Testing and Tuning

After installation, it’s crucial to test and tune your Subaru WRX to ensure optimal performance. Follow these steps:

  • Start the engine and check for any leaks from the turbocharger and associated lines.
  • Allow the engine to warm up before taking it for a test drive.
  • Monitor the boost levels with your gauge and make adjustments as necessary.
  • Consider a professional tune to maximize performance and reliability.

Maintenance Tips

To keep your Garrett GT3071R turbocharger performing at its best, follow these maintenance tips:

  • Regularly check oil levels and change the oil as recommended.
  • Inspect all connections for wear and tear, especially after the first few hundred miles.
  • Keep the air filter clean to ensure optimal airflow to the turbocharger.
  • Monitor boost levels and engine performance regularly.

Conclusion

Installing a Garrett GT3071R turbocharger can significantly enhance your Subaru WRX’s performance. By following this guide, you can ensure a successful installation and enjoy the benefits of increased power and responsiveness. Remember to maintain your turbocharger for long-lasting performance and reliability.