Table of Contents
The GR86 Titanium Exhaust System is an excellent upgrade for car enthusiasts looking to enhance their vehicle’s performance and sound. This guide will walk you through the installation process step-by-step, ensuring that you achieve the best results with your new exhaust system.
Tools and Materials Needed
- GR86 Titanium Exhaust System
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Cutting tool (if needed)
Before starting the installation, make sure you have all the necessary tools and materials. Safety gear is essential to protect yourself during the process.
Preparation
Begin by parking your GR86 on a flat surface. Engage the parking brake and ensure the vehicle is cool to the touch. Gather all your tools and materials to streamline the installation process.
Lift the Vehicle
Using a jack, lift the rear of the vehicle and securely place jack stands under the chassis. This will provide you with enough space to work comfortably under the car.
Removing the Stock Exhaust System
To install the GR86 Titanium Exhaust System, you first need to remove the stock exhaust. Follow these steps carefully:
- Locate the exhaust hangers and use a wrench to remove the bolts connecting the exhaust to the hangers.
- Disconnect the exhaust from the catalytic converter by removing the bolts.
- Carefully slide the exhaust out from the hangers and remove it from the vehicle.
Make sure to keep all the hardware, as you may need some of it for the new installation.
Installing the GR86 Titanium Exhaust System
Now that the stock system is removed, it’s time to install the new titanium exhaust system. Follow these steps:
- Begin by positioning the new titanium exhaust under the car, aligning it with the mounting points.
- Slide the exhaust into the hangers and ensure it is properly aligned with the catalytic converter.
- Secure the exhaust to the catalytic converter using the provided bolts. Make sure to tighten them to the manufacturer’s specifications.
- Reinstall the exhaust hangers, ensuring they are securely fastened.
Double-check all connections to ensure everything is tight and secure.
Final Adjustments and Testing
After installing the new exhaust system, it’s essential to make final adjustments before taking the vehicle for a test drive.
- Check the alignment of the exhaust tips to ensure they are centered and straight.
- Start the engine and listen for any unusual sounds that may indicate a leak or improper installation.
- Take the car for a short drive to evaluate the performance and sound of the new exhaust system.
If everything sounds good and there are no leaks, you have successfully installed your GR86 Titanium Exhaust System!
Maintenance Tips
To ensure the longevity and performance of your new exhaust system, consider the following maintenance tips:
- Regularly check for any loose bolts or hangers and tighten them as needed.
- Inspect the exhaust system for any signs of rust or damage.
- Clean the exhaust tips to maintain their appearance and prevent discoloration.
By following these maintenance tips, you can keep your GR86 Titanium Exhaust System in optimal condition for years to come.
Conclusion
The installation of a GR86 Titanium Exhaust System can significantly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new exhaust system. Remember to perform regular maintenance to keep your exhaust system in top shape.