Table of Contents
Upgrading the intercooler on your 2020+ Nissan GT-R R35 is a crucial step towards maximizing performance and efficiency. This guide will take you through the installation process step-by-step, ensuring that you achieve optimal results.
Why Upgrade Your Intercooler?
The intercooler plays a vital role in cooling the air that enters the engine, which enhances performance. Here are some reasons to consider an upgrade:
- Improved air density for better combustion.
- Increased horsepower and torque.
- Enhanced engine efficiency.
- Better performance during high-stress driving conditions.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- New intercooler
- Intercooler piping (if necessary)
- Silicone couplers
- Clamps
- Coolant (if applicable)
Step-by-Step Installation Guide
Step 1: Preparation
Begin by ensuring that your vehicle is parked on a flat surface and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the installation.
Step 2: Remove the Front Bumper
To access the intercooler, you will need to remove the front bumper. Follow these steps:
- Unscrew the bolts securing the bumper.
- Detach the clips holding the bumper in place.
- Carefully pull the bumper away from the vehicle.
Step 3: Remove the Old Intercooler
Once the bumper is off, locate the intercooler and disconnect the piping:
- Loosen the clamps on the inlet and outlet pipes.
- Remove the old intercooler from its mounting points.
- Take note of any sensors or connections that may need to be transferred.
Step 4: Install the New Intercooler
Now it’s time to install your new intercooler:
- Position the new intercooler in place.
- Secure it to the mounting points.
- Reconnect the inlet and outlet piping, ensuring all clamps are tight.
Step 5: Reassemble the Front Bumper
With the new intercooler installed, reattach the front bumper:
- Align the bumper with the vehicle body.
- Secure it with the screws and clips removed earlier.
Step 6: Reconnect the Battery and Test
Once everything is back in place, reconnect the negative battery terminal. Start the engine and check for any leaks or issues with the installation. Ensure that the intercooler is functioning properly during a test drive.
Final Thoughts
Upgrading your GT-R’s intercooler is a rewarding process that can lead to significant performance gains. By following this guide, you can ensure a successful installation that enhances your driving experience.