Gt-r Turbo Upgrade Installation Guide: Step-by-step with Hks Gtii Turbo Kit

by

The Nissan GT-R has long been celebrated for its performance and engineering excellence. Upgrading to a turbocharger can significantly enhance your vehicle’s power and responsiveness. This guide will walk you through the installation of the HKS GTII Turbo Kit on your GT-R.

Tools and Materials Needed

  • HKS GTII Turbo Kit
  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Wrenches
  • Oil catch can
  • New gaskets
  • Silicone hoses
  • Intercooler piping
  • Coolant
  • Engine oil
  • Safety glasses and gloves

Preparation Steps

Before starting the installation, ensure you have all the necessary tools and materials ready. Follow these steps to prepare your workspace:

  • Park the GT-R on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent electrical issues.
  • Remove any components that obstruct access to the turbo area, such as the air intake and intercooler.

Removing the Stock Turbocharger

With your GT-R prepared, it’s time to remove the stock turbocharger. Follow these steps:

  • Loosen and remove the exhaust manifold bolts.
  • Disconnect the oil and coolant lines from the stock turbo.
  • Carefully remove the stock turbocharger from the engine bay.
  • Inspect the area for any debris or oil leaks.

Installing the HKS GTII Turbo Kit

Now that the stock turbo is out, you can install the HKS GTII Turbo Kit. Follow these steps:

  • Place the new turbocharger onto the exhaust manifold.
  • Secure the turbocharger using the provided bolts, tightening them to the manufacturer’s specifications.
  • Reconnect the oil and coolant lines, ensuring they are properly sealed.
  • Attach the new gaskets and any silicone hoses included in the kit.
  • Install the intercooler piping, ensuring all connections are tight.

Reconnecting Components

After installing the turbo kit, it’s essential to reconnect all previously removed components. Follow these steps:

  • Reinstall the air intake system.
  • Reconnect the intercooler.
  • Ensure all hoses and clamps are secure and in good condition.
  • Double-check all electrical connections.

Final Steps

With everything reconnected, it’s time to perform the final checks:

  • Reconnect the battery.
  • Check the oil and coolant levels, topping off as necessary.
  • Start the engine and allow it to idle, checking for any leaks or unusual noises.
  • Take the car for a test drive to ensure the turbo is functioning correctly.

Troubleshooting Tips

If you encounter any issues during or after installation, consider the following troubleshooting tips:

  • Check all connections for tightness and leaks.
  • Verify that the correct gaskets were used and are properly seated.
  • Ensure that the oil and coolant lines are not kinked or blocked.
  • Consult the HKS installation manual for specific guidance on your kit.

Conclusion

Upgrading your GT-R with the HKS GTII Turbo Kit can provide significant performance enhancements. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new turbocharger.