Table of Contents
Installing GTM GT-R downpipes can significantly enhance your vehicle’s performance. This step-by-step guide will walk you through the installation process, ensuring you achieve optimal results while maintaining safety and efficiency.
Tools and Materials Needed
- GTM GT-R downpipes
- Ratchet and socket set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Exhaust sealant
Preparation Before Installation
Before starting the installation, make sure your vehicle is parked on a flat surface. Engage the parking brake and allow the exhaust system to cool completely. Gather all necessary tools and materials to ensure a smooth process.
Step 1: Lifting the Vehicle
Using a jack, lift the front of the vehicle and secure it with jack stands. This will provide adequate space to work under the car safely.
Step 2: Removing the Stock Downpipes
Locate the stock downpipes and remove any heat shields if applicable. Use a ratchet and socket set to unbolt the downpipes from the exhaust manifold and the catalytic converter. Be cautious of any remaining exhaust gases.
Step 3: Installing the GTM GT-R Downpipes
Align the GTM GT-R downpipes with the exhaust manifold and catalytic converter. Ensure a snug fit and use exhaust sealant on the connecting surfaces to prevent leaks. Bolt the downpipes into place using the original hardware, ensuring they are tightened to the manufacturer’s specifications using a torque wrench.
Step 4: Reinstalling Heat Shields
If your vehicle had heat shields, reinstall them over the new downpipes. This will help protect other components from heat damage.
Step 5: Lowering the Vehicle
Once the new downpipes are securely installed and any heat shields are in place, carefully lower the vehicle back to the ground. Remove the jack stands and ensure everything is clear from under the car.
Step 6: Final Checks
Start the engine and allow it to idle. Check for any exhaust leaks around the downpipes. If you notice any leaks, tighten the bolts as necessary. Listen for any unusual noises that could indicate improper installation.
Conclusion
Installing GTM GT-R downpipes can enhance your vehicle’s performance significantly. By following this step-by-step guide, you can ensure a successful installation. Always remember to work safely and consult a professional if you’re uncertain about any steps in the process.