Table of Contents
In the world of performance upgrades, few modifications can make as significant an impact as an oil cooler kit. Recently, I installed an AEM Oil Cooler Kit on my Mustang GT, and the results were impressive. Not only did it enhance the engine’s performance, but it also provided a boost of 15 horsepower. In this article, I will share my installation experience and the benefits of the AEM Oil Cooler Kit.
Why an Oil Cooler Kit?
Oil temperature plays a crucial role in engine performance. When the oil gets too hot, it loses its effectiveness in lubricating engine components. An oil cooler helps maintain optimal oil temperatures, which can lead to improved performance and longevity of the engine. Here are some reasons why I chose the AEM Oil Cooler Kit:
- Enhanced engine performance
- Increased horsepower
- Improved oil longevity
- Better protection against engine wear
Installation Process
The installation of the AEM Oil Cooler Kit was straightforward, thanks to the detailed instructions provided. Below is a step-by-step overview of the process:
Tools Required
- Socket set
- Wrenches
- Torque wrench
- Oil catch pan
- Drill with bits
Step 1: Prepare the Vehicle
Before starting the installation, I made sure the Mustang was parked on a level surface and the engine was cool. I gathered all the necessary tools and materials, including the AEM Oil Cooler Kit components.
Step 2: Remove the Front Bumper
The first step in the installation was to remove the front bumper. This allowed better access to the radiator area where the oil cooler would be mounted. I carefully detached the bumper by unscrewing the bolts and unclipping the connectors for the fog lights.
Step 3: Install the Oil Cooler
With the bumper removed, I positioned the AEM Oil Cooler in front of the radiator. I used the provided mounting brackets to secure it in place. Ensuring it was level and aligned properly was crucial for optimal airflow.
Step 4: Connect the Oil Lines
Next, I connected the oil lines to the engine and the cooler. This step required careful attention to avoid leaks. I ensured all connections were tight and secure, using a torque wrench to meet the specified torque settings.
Step 5: Reinstall the Front Bumper
After the cooler was installed and the oil lines connected, I reattached the front bumper. I double-checked all clips and connections to ensure everything was secure before moving on.
Step 6: Fill with Oil
With the installation complete, I filled the engine with fresh oil, ensuring the correct level was maintained. This step is essential as the new cooler would affect the oil capacity of the system.
Step 7: Test the System
Finally, I started the engine and let it run for a few minutes to check for leaks and ensure the oil cooler was functioning correctly. I monitored the oil temperature and pressure to confirm everything was operating within normal ranges.
Performance Results
After completing the installation, I took my Mustang GT for a test drive. The difference was immediately noticeable. Here are some of the performance improvements I experienced:
- 15 horsepower increase
- Quicker throttle response
- Improved engine stability under load
- Enhanced overall driving experience
Conclusion
Installing the AEM Oil Cooler Kit on my Mustang GT was a rewarding experience that yielded significant performance gains. Not only did I gain an additional 15 horsepower, but I also improved the engine’s longevity and reliability. If you’re considering an upgrade for your Mustang or any performance vehicle, I highly recommend looking into an oil cooler kit. It’s a modification that provides both immediate and long-term benefits.