Table of Contents
The Dodge Viper ACR is renowned for its power and performance. However, enthusiasts often seek ways to enhance this already impressive vehicle. One effective method is through the installation of a high-performance exhaust system, such as the Doug Levin Exhaust System. This article will guide you through the process of achieving over 100 horsepower gains with this modification.
Understanding the Dodge Viper ACR
The Dodge Viper ACR is a track-focused variant of the Viper, designed for speed and agility. With a powerful V10 engine, it delivers exhilarating performance. However, with the right modifications, such as the Doug Levin Exhaust System, you can push the limits of this beast even further.
Benefits of Upgrading to Doug Levin Exhaust System
Upgrading to the Doug Levin Exhaust System offers several advantages, including:
- Increased Horsepower: Expect gains of over 100 hp with this exhaust system.
- Improved Sound: Experience a more aggressive and sporty exhaust note.
- Weight Reduction: Lighter materials contribute to overall vehicle performance.
- Enhanced Engine Efficiency: Better exhaust flow improves engine performance.
Tools and Materials Needed
Before you begin the installation, gather the following tools and materials:
- Doug Levin Exhaust System
- Socket set
- Wrenches
- Jack and jack stands
- Safety goggles
- Gloves
- Torque wrench
Step-by-Step Installation Guide
1. Preparation
Start by ensuring the vehicle is parked on a flat surface. Engage the parking brake and wear safety goggles and gloves for protection.
2. Raise the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. This will provide access to the exhaust system.
3. Remove the Stock Exhaust System
Using the socket set, detach the stock exhaust system. Start from the rear and work your way forward, removing any clamps and hangers.
4. Install the Doug Levin Exhaust System
Position the Doug Levin Exhaust System in place. Ensure all mounting points align correctly. Secure it using the provided clamps and hangers.
5. Torque Specifications
Refer to the installation manual for specific torque specifications. Use the torque wrench to tighten all bolts and clamps securely.
6. Lower the Vehicle
Once the exhaust system is installed and secured, carefully lower the vehicle back to the ground.
7. Test the Exhaust System
Start the engine and listen for any unusual sounds. Ensure there are no leaks and that the exhaust system is functioning properly.
Performance Tuning After Installation
After installing the Doug Levin Exhaust System, consider tuning your vehicle to maximize performance gains. A performance tune can optimize fuel delivery and ignition timing, further enhancing horsepower.
Conclusion
Installing the Doug Levin Exhaust System on your Dodge Viper ACR can lead to significant performance improvements, including over 100 horsepower gains. With the right tools and careful installation, you can unleash the full potential of your vehicle. Always remember to follow up with performance tuning for the best results.