Table of Contents
The 6.2 Hellcat is a powerhouse, known for its impressive performance and ability to generate significant horsepower. However, many enthusiasts are always looking for ways to enhance their vehicles further. One of the most effective modifications is the installation of an MDS (Multi-Displacement System) exhaust system. This article will guide you through the steps to achieve over 100 additional horsepower with this upgrade.
Understanding the MDS Exhaust System
The MDS exhaust system is designed to optimize the flow of exhaust gases, allowing for better engine performance. It works by utilizing a series of valves and pipes that can be adjusted based on engine load and RPM, which helps in reducing back pressure and improving efficiency.
Benefits of Upgrading to an MDS Exhaust System
- Increased Horsepower: The primary benefit is the significant increase in horsepower, often exceeding 100 HP.
- Improved Sound: The MDS system provides a more aggressive exhaust note, enhancing the driving experience.
- Better Fuel Efficiency: By optimizing exhaust flow, the system can improve fuel economy under certain driving conditions.
- Enhanced Performance: Overall performance is improved, including throttle response and acceleration.
Installation Process
Installing an MDS exhaust system on your 6.2 Hellcat can be a rewarding project. Here’s a step-by-step guide to help you through the process:
Tools and Materials Needed
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust system (MDS compatible)
- Exhaust clamps
- Safety glasses and gloves
Step-by-Step Installation
Follow these steps to install your new MDS exhaust system:
- Step 1: Begin by safely lifting the vehicle using a jack and securing it with jack stands.
- Step 2: Remove the stock exhaust system by loosening the clamps and disconnecting the exhaust pipes.
- Step 3: Carefully remove the old exhaust system from the vehicle.
- Step 4: Install the MDS exhaust system by aligning it with the existing hangers and connections.
- Step 5: Secure the new exhaust system using the provided clamps.
- Step 6: Double-check all connections to ensure everything is tight and secure.
- Step 7: Lower the vehicle and start the engine to check for any leaks.
Tuning Your Hellcat for Optimal Performance
After installing the MDS exhaust system, it’s crucial to tune your Hellcat to maximize the benefits of the upgrade. Tuning adjusts the engine’s fuel and timing settings to match the new exhaust flow, ensuring optimal performance.
Choosing the Right Tuner
Selecting a quality tuner is essential. Look for tuners that specialize in performance modifications for the Hellcat platform. They will have the knowledge to get the most out of your new exhaust system.
Tuning Process
- Connect the Tuner: Plug the tuner into the OBD-II port of your vehicle.
- Select the Tune: Choose a performance tune that complements the MDS exhaust system.
- Upload the Tune: Follow the on-screen instructions to upload the new tune to your vehicle.
- Test Drive: After tuning, take your Hellcat for a test drive to feel the difference in performance.
Conclusion
Upgrading to an MDS exhaust system on your 6.2 Hellcat can lead to a significant increase in horsepower and overall performance. By following the installation process and tuning your vehicle appropriately, you can unleash the full potential of your Hellcat. Enjoy the enhanced sound and power that comes with this modification!