How to Install a Act Performance Flywheel: Boost Your Power and Smoothness

by

Installing an ACT Performance Flywheel can significantly enhance your vehicle’s performance by improving power delivery and smoothness. This guide will walk you through the steps to properly install a performance flywheel.

Tools and Materials Needed

  • ACT Performance Flywheel
  • Torque wrench
  • Socket set
  • Ratchet
  • Flywheel alignment tool
  • Engine oil or lubricant
  • Safety goggles
  • Gloves

Preparation Steps

Before starting the installation, ensure you have all the necessary tools and materials at hand. Follow these preparation steps:

  • Park your vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues.
  • Lift the vehicle using a jack and secure it with jack stands.
  • Remove any components that obstruct access to the flywheel, such as the transmission and clutch assembly.

Removing the Old Flywheel

Once you have access to the flywheel, follow these steps to remove the old flywheel:

  • Use a socket set to remove the bolts securing the flywheel.
  • Carefully detach the flywheel from the crankshaft.
  • Inspect the old flywheel for any signs of wear or damage.
  • Clean the mounting surface on the crankshaft to ensure a proper seal.

Installing the ACT Performance Flywheel

With the old flywheel removed, you can now install the ACT Performance Flywheel:

  • Align the new flywheel with the crankshaft, ensuring it fits snugly.
  • Use the flywheel alignment tool to ensure proper positioning.
  • Apply a small amount of engine oil or lubricant to the flywheel bolts.
  • Secure the flywheel by tightening the bolts in a crisscross pattern to ensure even pressure.
  • Use a torque wrench to tighten the bolts to the manufacturer’s specifications.

Reassembling the Components

After installing the flywheel, reassemble the components you previously removed:

  • Reinstall the clutch assembly, ensuring it is properly aligned with the flywheel.
  • Reconnect any electrical connections and components that were detached.
  • Double-check all bolts and connections for security.

Final Steps

Once everything is reassembled, follow these final steps:

  • Reconnect the battery.
  • Start the vehicle to ensure everything is functioning correctly.
  • Listen for any unusual noises that may indicate improper installation.
  • Take the vehicle for a short test drive to feel the improvements in performance.

Conclusion

Installing an ACT Performance Flywheel is a rewarding process that can significantly enhance your vehicle’s performance. By following this guide, you can ensure a successful installation that boosts your power and smoothness on the road.