Table of Contents
Installing a Borla exhaust system on your VW R32 can enhance performance and provide a more aggressive sound. This step-by-step tutorial will guide you through the entire installation process, ensuring you have all the necessary tools and knowledge to complete the job efficiently.
Tools and Materials Needed
- Jack and jack stands
- Socket set
- Wrench set
- Cutting tool (if needed)
- New Borla exhaust system
- Safety glasses
- Gloves
Before you begin, ensure you have all the necessary tools and materials ready. This will make the installation process smoother and more efficient.
Step 1: Prepare Your Vehicle
Start by parking your VW R32 on a flat surface and engaging the parking brake. Ensure the engine is cool before proceeding. Use the jack to lift the rear of the vehicle and secure it with jack stands for safety.
Step 2: Remove the Stock Exhaust System
Using your socket and wrench set, begin by loosening the bolts that connect the stock exhaust system to the catalytic converter. Depending on your setup, you may need to cut the exhaust pipe if it is welded.
Once the bolts are removed, carefully detach the exhaust hangers. A lubricant can help ease the removal of the hangers if they are stuck. Remove the stock exhaust system from the vehicle completely.
Step 3: Install the Borla Exhaust System
Begin by positioning the new Borla exhaust system under the vehicle. Align it with the mounting points and the catalytic converter. Ensure that the exhaust tips are centered and straight.
Attach the exhaust to the catalytic converter using the provided bolts. Tighten them securely, but be careful not to over-tighten and strip the threads.
Next, reattach the exhaust hangers. Ensure they are securely fastened and that the exhaust system is hanging straight without any obstructions.
Step 4: Check for Leaks
Before you lower the vehicle, start the engine and let it idle. Listen for any unusual sounds that may indicate a leak. If you notice any leaks, turn off the engine and check the connections, tightening them as necessary.
Step 5: Lower the Vehicle and Test Drive
Once you are confident that there are no leaks, carefully lower the vehicle back to the ground. Take your VW R32 for a test drive to experience the new exhaust system. Pay attention to the sound and performance enhancements.
Conclusion
Installing a Borla exhaust system on your VW R32 can significantly improve your vehicle’s performance and sound. By following these steps, you can complete the installation process efficiently and enjoy the benefits of your new exhaust system.