How to Install a Borla High Flow Cat in 3 Easy Steps: Boost Your Mustang’s Power

by

If you’re looking to enhance your Mustang’s performance, installing a Borla High Flow Catalytic Converter (Cat) is a great way to start. This modification can significantly increase your vehicle’s horsepower and torque while improving exhaust flow. In this article, we will guide you through the process of installing a Borla High Flow Cat in three easy steps.

Step 1: Gather Your Tools and Materials

Before you begin the installation, make sure you have all the necessary tools and materials. Here’s what you’ll need:

  • Borla High Flow Cat
  • Socket set
  • Wrenches
  • Jack and jack stands
  • Exhaust pipe cutter (if needed)
  • Safety goggles
  • Gloves

Step 2: Prepare Your Mustang

To ensure a smooth installation process, follow these preparation steps:

  • Park your Mustang on a flat surface and engage the parking brake.
  • Use the jack to lift the rear of the vehicle and secure it with jack stands.
  • Put on your safety goggles and gloves for protection.
  • Locate the existing catalytic converter in your exhaust system.

Step 3: Remove the Old Catalytic Converter

Now that your Mustang is prepared, it’s time to remove the old catalytic converter:

  • Using the socket set and wrenches, disconnect the exhaust pipes from the old catalytic converter.
  • If necessary, use the exhaust pipe cutter to remove any rusted or damaged sections.
  • Carefully remove the old catalytic converter from its mounting points.

Install the Borla High Flow Cat

With the old catalytic converter removed, you can now install the Borla High Flow Cat:

  • Position the Borla High Flow Cat in place of the old unit.
  • Reconnect the exhaust pipes to the new catalytic converter using the original hardware.
  • Ensure all connections are secure and properly aligned.

Final Steps and Testing

After the installation, follow these final steps:

  • Double-check all connections and bolts to ensure they are tight.
  • Lower your Mustang back to the ground.
  • Start the engine and listen for any unusual sounds.
  • Take your Mustang for a test drive to experience the improved performance.

By following these three easy steps, you can successfully install a Borla High Flow Cat and boost your Mustang’s power. Enjoy the enhanced performance and the exhilarating driving experience!