Table of Contents
Installing a Borla S-Type 3 Turbo-back exhaust on your Chevrolet Camaro can significantly enhance the vehicle’s performance and sound. This guide will walk you through the process step by step, ensuring you achieve maximum power and efficiency from your exhaust system.
Tools and Materials Needed
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Safety goggles
- Gloves
- Borla S-Type 3 Turbo-back exhaust kit
- Cutting tool (if necessary)
Before starting the installation, make sure you have all the necessary tools and materials. It’s important to work in a well-ventilated area and wear safety gear to protect yourself during the process.
Preparation Steps
To ensure a smooth installation, follow these preparation steps:
- Park your Camaro on a level surface.
- Engage the parking brake.
- Disconnect the negative battery terminal to prevent electrical issues.
- Lift the vehicle using a jack and secure it with jack stands.
Taking these precautions will help you work safely and efficiently on your vehicle.
Removing the Stock Exhaust System
Follow these steps to remove the stock exhaust system:
- Locate the connection points of the stock exhaust system.
- Use a cutting tool to separate the exhaust if necessary.
- Unbolt the exhaust hangers using the socket set.
- Carefully remove the stock exhaust from the vehicle.
Ensure that all components of the stock exhaust are removed completely to make way for the new Borla system.
Installing the Borla S-Type 3 Turbo-back Exhaust
Now it’s time to install the new exhaust system. Follow these steps:
- Start by positioning the new Borla exhaust in place.
- Align the exhaust pipes with the connection points on the vehicle.
- Use the provided hardware to bolt the exhaust in place.
- Ensure all connections are tight but do not overtighten.
- Hang the exhaust using the stock hangers or the new ones provided.
Make sure everything is aligned properly to avoid any rattling or misalignment during operation.
Final Checks and Reconnecting the Battery
Before completing the installation, perform these final checks:
- Inspect all connections for tightness.
- Check for any signs of leaks.
- Ensure that the exhaust is securely hung and does not touch any components of the vehicle.
Once you have confirmed everything is in order, reconnect the negative battery terminal.
Testing the New Exhaust System
After installation, it’s crucial to test the new exhaust system:
- Start the engine and listen for any unusual noises.
- Check for exhaust leaks around the joints and connections.
- Take the car for a short drive to evaluate performance.
If everything sounds and feels right, your installation is a success!
Conclusion
Installing a Borla S-Type 3 Turbo-back exhaust on your Chevrolet Camaro can greatly enhance both performance and sound. By following these steps carefully, you can enjoy the benefits of your new exhaust system and experience the power it brings to your vehicle.