How to Install a Brabus Power Kit on Your E63 Amg for an Extra 100 Hp

by

The E63 AMG is a high-performance vehicle that combines luxury with power. For enthusiasts looking to boost their car’s performance, installing a Brabus Power Kit can add an impressive 100 horsepower. This guide will walk you through the installation process step-by-step.

What You Need Before Starting

Before you begin the installation, ensure you have the following tools and materials ready:

  • Brabus Power Kit
  • Socket set
  • Torque wrench
  • Screwdrivers (flat and Phillips)
  • Wire cutters
  • Safety goggles
  • Gloves

Step 1: Preparing Your Vehicle

Before starting the installation, it’s crucial to prepare your vehicle properly. Follow these steps:

  • Park the car on a flat surface.
  • Ensure the engine is cool.
  • Disconnect the battery to prevent any electrical issues.

Step 2: Removing the Engine Cover

The first physical step in the installation is to remove the engine cover. Here’s how:

  • Locate the screws or clips holding the engine cover in place.
  • Using the appropriate screwdriver or socket, remove these fasteners.
  • Carefully lift the engine cover off and set it aside.

Step 3: Installing the Brabus Power Kit

Now it’s time to install the Brabus Power Kit. Follow these instructions closely:

  • Locate the ECU (Engine Control Unit) in your E63 AMG.
  • Carefully disconnect the wiring harness from the ECU.
  • Connect the Brabus Power Kit wiring harness to the ECU.
  • Secure the connections and ensure they are tight.

Step 4: Replacing the Air Filter

The Brabus Power Kit often includes an upgraded air filter. Follow these steps to replace it:

  • Locate the air filter housing.
  • Remove the screws or clips securing the housing.
  • Take out the old air filter and replace it with the new one from Brabus.
  • Reassemble the air filter housing and secure it properly.

Step 5: Reconnecting the Battery

Once the installation is complete, it’s time to reconnect the battery:

  • Reconnect the negative terminal of the battery first.
  • Ensure the connection is secure.

Step 6: Testing the Installation

After everything is reassembled, it’s essential to test the installation:

  • Start the engine and listen for any unusual sounds.
  • Check for warning lights on the dashboard.
  • Take the car for a test drive to experience the added power.

Final Thoughts

Installing a Brabus Power Kit on your E63 AMG can significantly enhance your driving experience. By following these steps carefully, you can enjoy an extra 100 horsepower and the thrill that comes with it. Always remember to consult a professional if you’re unsure about any part of the installation process.