Table of Contents
Installing a CorkSport exhaust on your ND Miata can enhance performance and sound. This step-by-step guide will walk you through the installation process to ensure you get it right the first time.
Tools and Materials Needed
- Socket set
- Torque wrench
- Ratchet
- Jack and jack stands
- Safety glasses
- CorkSport exhaust system
- New gaskets (if needed)
- Anti-seize lubricant
Preparation
Before starting the installation, ensure your Miata is parked on a flat surface and the engine is cool. Gather all tools and materials to avoid interruptions during the process.
Step 1: Lift the Vehicle
Using a jack, lift the rear of the vehicle and securely place it on jack stands. Make sure the car is stable before proceeding.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system. Using a socket set, remove the bolts connecting the exhaust to the header and the hangers holding it in place. Carefully lower the stock exhaust and set it aside.
Step 3: Prepare for Installation
Inspect the exhaust mounting points for any damage. If the gaskets are worn, replace them with new ones. Apply anti-seize lubricant to the bolts to ensure easy removal in the future.
Step 4: Install the CorkSport Exhaust
Position the CorkSport exhaust in place, aligning it with the mounting points. Start by securing the exhaust to the header with bolts, ensuring the gaskets are properly seated. Next, attach the hangers to the chassis.
Step 5: Tighten All Connections
Using a torque wrench, tighten all bolts to the manufacturer’s specifications. This ensures a secure fit and prevents exhaust leaks.
Step 6: Lower the Vehicle
Once everything is tightened, carefully lower the vehicle back to the ground. Remove the jack stands and ensure the car is stable.
Final Checks
Start the engine and listen for any unusual sounds. Check for leaks around the gaskets and connections. If everything sounds good, take your Miata for a short drive to ensure the exhaust functions properly.
Conclusion
Installing a CorkSport exhaust on your ND Miata can be a rewarding project that enhances both performance and sound. By following this step-by-step guide, you can ensure a successful installation. Enjoy your new exhaust and the improved driving experience!