Table of Contents
The Infiniti G35 is a popular choice among car enthusiasts, known for its performance and sleek design. One of the best ways to enhance its power and sound is by installing a custom exhaust system. In this guide, we will walk you through the steps to install a custom exhaust on your Infiniti G35, potentially adding over 25 horsepower and giving your car an aggressive sound.
Understanding the Benefits of a Custom Exhaust
Before diving into the installation process, it’s essential to understand the benefits of upgrading to a custom exhaust system. Here are some key advantages:
- Increased Horsepower: A custom exhaust can improve engine efficiency, leading to a noticeable increase in horsepower.
- Enhanced Sound: A performance exhaust gives your G35 a deeper, more aggressive sound that can turn heads.
- Weight Reduction: Many aftermarket exhaust systems are lighter than stock systems, improving overall vehicle performance.
- Improved Aesthetics: A custom exhaust can enhance the look of your vehicle’s rear end with stylish tips and design.
Tools and Materials Needed
To successfully install a custom exhaust on your Infiniti G35, you will need the following tools and materials:
- Custom exhaust system (cat-back preferred)
- Jack and jack stands or ramps
- Socket set
- Wrench set
- Cutting tool (if necessary)
- Safety glasses and gloves
- Anti-seize lubricant
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Use a jack to lift the rear of the car and secure it with jack stands or ramps for safety.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system starting from the headers to the tailpipe. Use your socket set to remove the bolts securing the exhaust to the catalytic converter and the hangers holding it in place. If the exhaust is rusted, you may need to use a cutting tool to remove it.
Step 3: Install the New Exhaust System
Begin by fitting the new exhaust system to the catalytic converter. Ensure that the flanges align properly and use anti-seize lubricant on the bolts before tightening them. Next, attach the exhaust hangers to the factory mounting points.
Step 4: Adjust and Secure the Exhaust
Once the new exhaust is in place, adjust it to ensure proper clearance from the chassis and any other components. Tighten all bolts securely and double-check the hangers to ensure everything is stable.
Step 5: Test the Installation
Start your vehicle and listen for any unusual noises that may indicate a leak. Check for exhaust leaks at all connection points. If everything sounds good, take your G35 for a test drive to experience the new sound and performance.
Tips for a Successful Installation
- Read the manufacturer’s instructions carefully before installation.
- Consider having a friend assist you for easier handling of the exhaust components.
- Wear safety gear to protect yourself during the installation process.
- Take your time to ensure all connections are secure and leak-free.
Conclusion
Installing a custom exhaust on your Infiniti G35 can significantly enhance its performance and sound. By following this guide and taking the necessary precautions, you can achieve a successful installation that adds horsepower and style to your vehicle. Enjoy the aggressive sound and improved driving experience that comes with your new exhaust!