Table of Contents
If you own a Mustang GT and are looking to enhance its performance, installing a DSS alloy driveshaft is a great upgrade. This guide will walk you through the complete installation process step-by-step.
Tools and Materials Needed
- DSS alloy driveshaft
- Jack and jack stands
- Socket set
- Torque wrench
- Impact wrench (optional)
- Safety glasses
- Gloves
Before starting the installation, ensure you have all the necessary tools and materials. Safety is paramount, so wear gloves and safety glasses throughout the process.
Preparation
Begin by parking your Mustang GT on a flat, stable surface. Engage the parking brake and ensure the vehicle is in gear or in park if it’s an automatic transmission.
Next, raise the rear of the vehicle using a jack and secure it with jack stands. Make sure the vehicle is stable before crawling underneath.
Removing the Stock Driveshaft
Locate the stock driveshaft under the vehicle. Identify the bolts securing it to the rear differential and the transmission.
Using your socket set, remove the bolts from the rear differential first. Keep these bolts in a safe place as you will need them for the new driveshaft.
Next, move to the transmission side and remove the bolts securing the driveshaft there as well. Once all bolts are removed, carefully slide the driveshaft out of the transmission and set it aside.
Installing the DSS Alloy Driveshaft
Take the DSS alloy driveshaft and align it with the transmission output. Carefully slide it into place, ensuring it fits snugly.
Once the driveshaft is in position, use the original bolts to secure it to the transmission. Tighten the bolts to the manufacturer’s specifications using a torque wrench.
Next, move to the rear differential. Align the driveshaft with the differential and insert the bolts. Again, tighten these bolts to the specified torque settings.
Final Checks
Once everything is secured, double-check all bolts to ensure they are tightened properly. This step is crucial to avoid any issues while driving.
Lower the vehicle from the jack stands and start the engine. Listen for any unusual noises that could indicate a problem with the installation.
Test Drive
Take your Mustang GT for a test drive to ensure everything is functioning correctly. Pay attention to the performance and any vibrations that may occur.
If you notice any issues, recheck the installation to ensure everything is secure and properly aligned.
Conclusion
Installing a DSS alloy driveshaft on your Mustang GT can significantly improve performance and durability. By following this step-by-step guide, you can ensure a successful installation.
Always remember to perform regular maintenance checks on your vehicle to keep it running smoothly.