Table of Contents
The 718 Cayman is known for its impressive performance, but you can enhance its throttle response even further by installing a lightweight flywheel. This guide will walk you through the steps to install a DSShafts lightweight flywheel on your 718 Cayman.
Why Upgrade to a Lightweight Flywheel?
A lightweight flywheel reduces the mass that the engine has to spin, leading to quicker throttle response and improved acceleration. Here are some benefits of upgrading:
- Improved throttle response
- Enhanced acceleration
- Reduced engine load
- Better overall performance
Tools and Materials Needed
Before you begin the installation, make sure you have the following tools and materials:
- Jack and jack stands
- Socket set
- Torque wrench
- Flywheel alignment tool
- DSShafts lightweight flywheel
- New flywheel bolts
- Transmission fluid
Step-by-Step Installation Process
Step 1: Prepare Your Vehicle
Start by parking your 718 Cayman on a flat surface. Engage the parking brake and disconnect the battery to ensure safety during the installation process.
Step 2: Raise the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. This will give you access to the transmission and flywheel.
Step 3: Remove the Transmission
Begin by removing the exhaust system and any components obstructing the transmission. Disconnect the driveshaft and unbolt the transmission from the engine. Carefully lower the transmission to gain access to the flywheel.
Step 4: Remove the Old Flywheel
Once the transmission is out, remove the old flywheel by unbolting it from the engine. Make sure to keep the old bolts if you plan to reuse them, although it is recommended to use new bolts.
Step 5: Install the DSShafts Lightweight Flywheel
Align the new DSShafts lightweight flywheel with the engine and secure it using the new flywheel bolts. Make sure to torque the bolts to the manufacturer’s specifications for a secure fit.
Step 6: Reinstall the Transmission
With the new flywheel in place, carefully lift the transmission back into position and bolt it to the engine. Reconnect the driveshaft and any other components you previously removed.
Step 7: Lower the Vehicle and Reconnect the Battery
Once everything is secured, lower the vehicle from the jack stands and reconnect the battery. Ensure all tools are removed from under the vehicle before starting the engine.
Final Checks
After installation, it’s important to check the following:
- Fluid levels
- Transmission mounts
- Flywheel bolts for proper torque
Conclusion
Installing a DSShafts lightweight flywheel on your 718 Cayman can significantly enhance your vehicle’s performance. By following these steps, you can ensure a successful installation and enjoy the benefits of improved throttle response.