Table of Contents
Installing a GReddy exhaust system on your Integra Type S can enhance performance and give your vehicle a distinctive sound. This guide will walk you through the necessary steps to successfully install the exhaust system.
Tools and Materials Needed
- GReddy Exhaust System
- Socket set
- Wrenches
- Jack and jack stands
- Safety goggles
- Gloves
- Penetrating oil
- Torque wrench
Preparation Steps
Before beginning the installation, ensure you have all the necessary tools and materials. Follow these preparation steps:
- Park the vehicle on a level surface.
- Engage the parking brake.
- Disconnect the battery to avoid any electrical issues.
- Lift the vehicle using the jack and secure it with jack stands.
Removing the Stock Exhaust System
To install the new GReddy exhaust system, you must first remove the stock exhaust. Follow these steps:
- Apply penetrating oil to the exhaust hangers and bolts to make removal easier.
- Locate the bolts connecting the exhaust to the header and the mid-pipe.
- Use the socket set to remove these bolts.
- Remove the exhaust hangers using a wrench or pliers.
- Carefully take out the stock exhaust system from under the vehicle.
Installing the GReddy Exhaust System
With the stock exhaust removed, you can now install the GReddy exhaust system. Follow these steps:
- Begin by positioning the new GReddy exhaust system under the vehicle.
- Align the exhaust with the header and mid-pipe connections.
- Insert the bolts through the exhaust flanges and tighten them using the socket set.
- Attach the exhaust hangers to secure the exhaust in place.
- Ensure everything is aligned properly before tightening all bolts to the manufacturer’s specifications.
Final Checks and Reconnecting the Battery
Once the installation is complete, perform the following final checks:
- Inspect all connections to ensure they are secure.
- Check for any signs of leaks.
- Reinstall any heat shields that were removed during the process.
- Reconnect the battery.
Testing the New Exhaust System
After the installation, it’s essential to test the new exhaust system:
- Start the engine and listen for any unusual noises.
- Check for exhaust leaks around the connections.
- Take the vehicle for a short drive to ensure everything is functioning correctly.
Conclusion
Installing a GReddy exhaust system on your Integra Type S can significantly enhance your driving experience. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of improved performance and sound.