Table of Contents
Installing a Greddy exhaust system on your Toyota MR2 can significantly enhance both power and sound, providing an exhilarating driving experience. This guide will walk you through the steps to successfully install the exhaust system, ensuring you achieve optimal performance and a thrilling sound profile.
Tools and Materials Needed
- Greddy exhaust system for Toyota MR2
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Exhaust hanger lubricant
Before starting the installation, gather all necessary tools and materials to ensure a smooth process. Safety should be your priority, so make sure to wear safety glasses and gloves throughout the installation.
Preparation Steps
1. **Park the Vehicle**: Ensure your Toyota MR2 is parked on a flat, stable surface. Engage the parking brake for added safety.
2. **Lift the Vehicle**: Use a jack to lift the rear of the vehicle and secure it with jack stands. This will give you ample space to work underneath the car.
3. **Inspect the Existing Exhaust**: Before removing the old exhaust system, inspect it for any damage or rust. This will help you identify what needs to be removed and replaced.
Removing the Old Exhaust System
1. **Loosen the Bolts**: Using the socket set, loosen and remove the bolts connecting the exhaust to the catalytic converter and the exhaust hangers. Be cautious of any rust or corrosion that may make this step challenging.
2. **Remove Exhaust Hangers**: Carefully remove the exhaust hangers using lubricant if necessary. This will make it easier to slide the exhaust out.
3. **Take Out the Old Exhaust**: Once all bolts and hangers are removed, carefully slide the old exhaust system out from under the vehicle. Set it aside for disposal or recycling.
Installing the Greddy Exhaust System
1. **Position the New Exhaust**: Begin by positioning the Greddy exhaust system under the vehicle. Ensure that it aligns properly with the catalytic converter and exhaust hangers.
2. **Attach the Exhaust to the Catalytic Converter**: Use the provided bolts to secure the exhaust system to the catalytic converter. Tighten them evenly to ensure a proper seal.
3. **Install Exhaust Hangers**: Apply lubricant to the exhaust hangers and slide them into place. Ensure they are securely fastened to the vehicle’s chassis.
4. **Check Alignment**: Before finalizing all connections, check the alignment of the exhaust system. Ensure that it is centered and not touching any other components of the vehicle.
Final Steps
1. **Tighten All Bolts**: Once you are satisfied with the alignment, go back and tighten all bolts securely. This will prevent any leaks or vibrations during operation.
2. **Lower the Vehicle**: Carefully lower the vehicle back to the ground using the jack, removing the jack stands once it is secure.
3. **Start the Engine**: Start your Toyota MR2 to check for any leaks or unusual sounds. Listen closely to ensure everything is functioning correctly.
4. **Test Drive**: Take your MR2 for a test drive to experience the improved power and sound of your new Greddy exhaust system. Enjoy the enhanced performance!
Conclusion
Installing a Greddy exhaust system on your Toyota MR2 can lead to significant improvements in both performance and sound. By following these steps carefully, you can enhance your driving experience and enjoy the benefits of a high-quality exhaust system.