Table of Contents
Installing a GTS turbocharger on your Infiniti Q60 can significantly enhance its performance and driving experience. This step-by-step guide will walk you through the process, ensuring you understand each phase of the installation. With a budget of around $2,500, you can achieve a remarkable upgrade.
Tools and Materials Needed
- GTS Turbocharger Kit
- Socket Set
- Torque Wrench
- Screwdrivers
- Oil Filter Wrench
- New Oil and Coolant
- Silicone Hose Clamps
- Intercooler Piping
- Vacuum Hose
- Safety Glasses and Gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace and all necessary tools at hand. It’s also advisable to read through the turbocharger kit’s manual for specific instructions related to your model.
1. Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation process.
2. Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift it off and set it aside.
Removing the Stock Turbocharger
With the engine cover removed, you can now access the stock turbocharger. Follow these steps to remove it safely.
1. Disconnect the Intake and Exhaust Hoses
Loosen the clamps on the intake and exhaust hoses connected to the stock turbocharger. Gently pull them off and set them aside.
2. Remove the Oil and Coolant Lines
Carefully disconnect the oil and coolant lines from the stock turbocharger. Be prepared for some fluid to spill, so have a catch pan ready.
3. Unscrew the Turbocharger
Using a socket wrench, unscrew the bolts securing the turbocharger to the exhaust manifold. Once loose, carefully remove the turbocharger from its position.
Installing the GTS Turbocharger
Now that the stock turbocharger is removed, it’s time to install the GTS turbocharger. Follow these steps carefully.
1. Position the GTS Turbocharger
Align the GTS turbocharger with the exhaust manifold. Ensure it fits securely into place before proceeding.
2. Secure the Turbocharger
Using the same bolts you removed earlier, secure the GTS turbocharger to the exhaust manifold. Be sure to follow the recommended torque specifications from the turbocharger kit manual.
3. Reconnect Oil and Coolant Lines
Reconnect the oil and coolant lines to the GTS turbocharger. Ensure they are tightened properly to prevent leaks.
4. Attach the Intake and Exhaust Hoses
Reattach the intake and exhaust hoses to the GTS turbocharger. Make sure they are secured with the clamps you removed earlier.
Final Steps
With the GTS turbocharger installed, there are a few final steps to complete before hitting the road.
1. Replace the Engine Cover
Carefully place the engine cover back onto the engine and secure it with the bolts you removed earlier.
2. Reconnect the Battery
Reconnect the negative terminal of the battery and ensure it is tightened properly.
3. Check for Leaks
Start the engine and let it idle for a few minutes. Check for any signs of oil or coolant leaks around the turbocharger.
4. Test Drive
Once you’ve confirmed there are no leaks, take your Infiniti Q60 for a test drive. Pay attention to the performance and listen for any unusual sounds.
Conclusion
Installing a GTS turbocharger on your Infiniti Q60 can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new turbocharger.