Table of Contents
The HKS Super Hybrid Turbo Kit is a popular upgrade for the Infiniti Q50 VR30DDTT, offering enhanced performance and responsiveness. This guide will provide you with a step-by-step process to install the kit successfully.
Tools and Materials Needed
- HKS Super Hybrid Turbo Kit
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Wrenches
- Oil catch can
- New gaskets
- Silicone hose
- Heat-resistant gloves
- Safety goggles
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials. It’s also important to work in a well-ventilated area and allow the engine to cool down completely.
1. Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation process.
2. Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside.
3. Drain the Engine Oil
To prevent spills, place an oil catch can under the oil pan and drain the engine oil completely.
Turbo Kit Installation Steps
4. Remove the Stock Turbo
Unbolt the stock turbocharger from its mounting points. Carefully disconnect the oil and coolant lines, ensuring to catch any residual fluid.
5. Install New Gaskets
Before installing the new turbo, place the new gaskets in their respective positions to ensure a proper seal.
6. Install the HKS Super Hybrid Turbo
Position the HKS turbo in place and secure it with the bolts. Make sure to torque the bolts to the manufacturer’s specifications for a secure fit.
7. Reconnect Oil and Coolant Lines
Reconnect the oil and coolant lines to the new turbo, ensuring that they are tightly secured to prevent leaks.
8. Reinstall the Engine Cover
Once the turbo is installed, replace the engine cover and secure it with the bolts you removed earlier.
9. Refill Engine Oil
Refill the engine with the appropriate type and amount of oil as specified in your vehicle’s manual.
Final Steps
10. Reconnect the Battery
Reconnect the negative terminal of the battery, ensuring a secure connection.
11. Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks or unusual noises coming from the turbo area.
12. Test Drive
Take your Q50 for a test drive to ensure everything is functioning properly. Pay attention to the turbo’s performance and listen for any irregular sounds.
Conclusion
Installing the HKS Super Hybrid Turbo Kit on your Q50 VR30DDTT can significantly enhance your vehicle’s performance. Follow these steps carefully to ensure a successful installation. Regular maintenance and checks will help keep your turbo running smoothly for years to come.