Table of Contents
The HKS Super Turbo Exhaust is a popular upgrade for the first-generation Acura NSX, known for enhancing both performance and sound. This guide will walk you through the installation process step by step, ensuring you get the most out of your exhaust system.
Tools and Materials Needed
- HKS Super Turbo Exhaust System
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust gasket (if not included)
- Safety glasses
- Gloves
Before beginning the installation, make sure you have all the necessary tools and materials ready. This will help streamline the process and avoid interruptions.
Preparation
Start by parking your NSX on a flat surface and engaging the parking brake. Allow the vehicle to cool down if it has been driven recently. Gather your tools and materials to ensure everything is within reach.
Removing the Stock Exhaust
The first step is to remove the stock exhaust system. Follow these steps:
- Using a jack, lift the rear of the vehicle and secure it with jack stands.
- Locate the bolts connecting the stock exhaust to the catalytic converter and muffler.
- Using a socket or wrench, carefully remove these bolts. Keep them in a safe place in case you need them later.
- Remove any hangers or brackets holding the exhaust in place.
- Once everything is disconnected, carefully slide the stock exhaust out from under the vehicle.
Be cautious during this process to avoid damaging any components. It may be helpful to have a friend assist you.
Installing the HKS Super Turbo Exhaust
Now that the stock exhaust is removed, it’s time to install the HKS Super Turbo Exhaust. Follow these steps:
- Begin by positioning the HKS exhaust under the vehicle, aligning it with the exhaust hangers.
- Slide the exhaust into place, ensuring it is properly aligned with the catalytic converter.
- Attach any hangers or brackets that came with the HKS exhaust to secure it in place.
- Using the bolts you removed earlier, connect the exhaust to the catalytic converter.
- Ensure all connections are tight and secure.
Double-check that everything is aligned correctly before proceeding to the next step.
Final Checks
After the installation is complete, it’s essential to perform a few final checks:
- Inspect all connections to ensure they are tight and secure.
- Check for any leaks by starting the engine and listening for unusual sounds.
- Ensure the exhaust does not come into contact with any other components of the vehicle.
Once you are satisfied with the installation, lower the vehicle back to the ground.
Enjoying Your New Exhaust
With the HKS Super Turbo Exhaust installed, take your NSX for a test drive. You should notice an increase in performance and a more aggressive sound. Enjoy the enhanced driving experience!
Maintenance Tips
To keep your new exhaust system in optimal condition, consider the following maintenance tips:
- Regularly check for loose bolts and connections.
- Inspect the exhaust for any signs of rust or damage.
- Clean the exhaust tips to maintain appearance.
By following these tips, you can ensure the longevity and performance of your HKS Super Turbo Exhaust.
Conclusion
Installing the HKS Super Turbo Exhaust on your first-gen NSX is a rewarding project that enhances both performance and sound. With careful preparation and attention to detail, you can successfully complete this upgrade and enjoy the benefits it brings to your driving experience.