How to Install a Juiced 1500 Hp Nos Kit for the Quarter Mile: Step-by-step Guide

by

Installing a Juiced 1500 HP NOS kit can significantly enhance your vehicle’s performance, especially for quarter-mile racing. This guide will walk you through the step-by-step process to ensure a successful installation.

Tools and Materials Needed

  • Juiced 1500 HP NOS Kit
  • Socket set
  • Wrenches
  • Drill and drill bits
  • Wire strippers and crimpers
  • Electrical tape
  • Safety goggles
  • Gloves

Step 1: Preparation

Before you begin, ensure your vehicle is parked on a flat surface. Turn off the ignition and disconnect the battery to avoid any electrical hazards during installation.

Step 2: Mounting the NOS Bottle

Locate a suitable spot in your trunk or cargo area for the NOS bottle. It should be secure and easily accessible. Use the following steps to mount it:

  • Mark the drilling points for the mounting brackets.
  • Drill holes for the bolts.
  • Attach the brackets and secure the NOS bottle using bolts.

Step 3: Installing the Nitrous Lines

Next, you will need to run the nitrous lines from the bottle to the engine compartment. This process involves:

  • Measure and cut the nitrous line to the required length.
  • Use grommets to protect the lines where they pass through the firewall.
  • Secure the lines along the chassis using zip ties.

Step 4: Connecting the Nitrous Solenoid

The nitrous solenoid controls the flow of nitrous oxide to the engine. Follow these steps to connect it:

  • Mount the solenoid near the intake manifold.
  • Connect the nitrous line from the bottle to the inlet of the solenoid.
  • Attach another line from the outlet of the solenoid to the intake manifold.

Step 5: Electrical Connections

Now, you need to wire the solenoid to a switch that will activate it. This step includes:

  • Run a power wire from the battery to the switch.
  • Connect a wire from the switch to the solenoid.
  • Ensure all connections are secure and insulated with electrical tape.

Step 6: Installing the Activation Switch

Choose a convenient location for the activation switch inside the vehicle. Follow these steps:

  • Drill a hole for the switch in your chosen location.
  • Secure the switch in place with the provided hardware.
  • Connect the switch to the power wire and solenoid as previously described.

Step 7: Testing the System

Before hitting the track, it’s crucial to test the system. Follow these steps:

  • Reconnect the battery.
  • Start the vehicle and ensure everything is functioning properly.
  • Activate the switch to check if the solenoid opens and closes correctly.

Step 8: Safety Checks

Safety is paramount when using a NOS kit. Ensure the following:

  • Check for any leaks in the nitrous lines.
  • Verify that all electrical connections are secure.
  • Make sure the NOS bottle is properly secured and not obstructing any vehicle functions.

Conclusion

Installing a Juiced 1500 HP NOS kit can provide your vehicle with the extra power needed for quarter-mile racing. By following this step-by-step guide, you can ensure a successful installation and enjoy the thrill of enhanced performance.