How to Install a Kw Coilover Kit on Your Audi Rs6 for Better Handling and $3,000

by

Installing a KW coilover kit on your Audi RS6 can significantly enhance its handling capabilities and driving experience. This guide will walk you through the steps required to successfully install the coilover kit, ensuring you can enjoy improved performance on the road or track.

Tools and Materials Needed

  • KW coilover kit
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressor
  • Flathead screwdriver
  • Ratchet and extensions
  • Brake cleaner
  • Lubricant

Preparation Steps

Before you begin the installation, ensure you have a clean workspace and all necessary tools ready. Follow these preparation steps:

  • Park your Audi RS6 on a flat surface.
  • Engage the parking brake and disconnect the battery.
  • Remove the wheels to gain access to the suspension components.

Removing the Stock Suspension

To install the KW coilover kit, you’ll first need to remove the factory suspension. Follow these steps:

  • Using a socket set, remove the bolts securing the strut to the hub assembly.
  • Detach the sway bar link from the strut.
  • Remove the top strut mount bolts located in the engine bay.
  • Carefully pull the strut assembly out of the wheel well.
  • Repeat the process for the rear suspension components.

Installing the KW Coilover Kit

With the stock suspension removed, you can now install the KW coilover kit. Follow these steps for proper installation:

  • Using a spring compressor, compress the stock springs and remove them from the strut assembly.
  • Install the KW coilover spring onto the strut, ensuring it sits correctly in the spring perch.
  • Reassemble the strut by attaching the top mount and securing it with bolts.
  • Carefully insert the coilover strut into the wheel well and secure it to the hub assembly.
  • Reconnect the sway bar link to the strut.
  • Repeat the process for the rear coilovers.

Adjusting the Coilovers

Once the coilovers are installed, you will need to adjust them to your desired height and damping settings. Follow these steps:

  • Use the adjustment tool provided with the KW kit to set the ride height to your preference.
  • Adjust the damping settings according to your driving style; refer to the KW manual for guidance.
  • Ensure all adjustments are secure and double-check the torque on all bolts.

Final Steps

After installation and adjustment, follow these final steps to complete the process:

  • Reinstall the wheels and lower the car back to the ground.
  • Reconnect the battery and check for any issues.
  • Take your Audi RS6 for a test drive to ensure everything is functioning correctly.
  • Consider getting a professional alignment to ensure optimal handling.

Conclusion

Installing a KW coilover kit on your Audi RS6 is a rewarding project that can enhance your vehicle’s performance significantly. With the right tools and careful attention to detail, you can achieve a better handling experience for around $3,000. Enjoy the improved ride and handling!