How to Install a Kw V3 Coilover Kit on the Integra Type S: Performance and Handling Improvements

by

Installing a KW V3 coilover kit on your Integra Type S can significantly enhance its performance and handling. This guide will walk you through the installation process, ensuring that you can enjoy a more responsive driving experience.

Tools and Materials Needed

  • KW V3 Coilover Kit
  • Jack and jack stands
  • Socket wrench set
  • Torque wrench
  • Pliers
  • Spring compressors
  • Lubricant
  • Safety glasses

Preparation Steps

Before starting the installation, ensure that you have a clean workspace and that all tools and materials are ready. Follow these preparation steps:

  • Park the car on a level surface.
  • Engage the parking brake.
  • Loosen the lug nuts on the wheels but do not remove them yet.

Removing the Stock Suspension

To install the KW V3 coilover kit, you must first remove the factory suspension. Follow these steps:

  • Lift the front of the car using a jack and secure it with jack stands.
  • Remove the front wheels.
  • Disconnect the sway bar links from the struts.
  • Remove the bolts securing the struts to the knuckle.
  • Unbolt the top strut mounts from the engine bay.
  • Carefully remove the struts from the vehicle.

Installing the KW V3 Coilovers

With the stock suspension removed, you can now install the KW V3 coilovers. Follow these steps:

  • Assemble the KW coilovers according to the manufacturer’s instructions.
  • Install the new coilovers into the strut towers.
  • Secure the top mounts with the provided hardware.
  • Reattach the struts to the knuckles using the original bolts.
  • Reconnect the sway bar links.

Adjusting the Coilover Settings

One of the main benefits of the KW V3 coilover kit is the ability to adjust the settings. Follow these steps to adjust your coilovers:

  • Set the ride height according to your preference.
  • Adjust the rebound settings using the knobs on the coilovers.
  • Fine-tune the compression settings for a balanced ride.

Reinstalling the Wheels and Lowering the Car

After the coilovers are installed and adjusted, it’s time to reinstall the wheels and lower the car:

  • Reinstall the front wheels and hand-tighten the lug nuts.
  • Lower the car back to the ground using the jack.
  • Once the car is on the ground, torque the lug nuts to the manufacturer’s specifications.

Final Checks and Test Drive

Before taking your Integra Type S for a spin, perform these final checks:

  • Inspect all connections and bolts to ensure everything is secure.
  • Check the ride height and make any necessary adjustments.
  • Take the car for a test drive to evaluate handling and comfort.

Conclusion

Installing a KW V3 coilover kit on your Integra Type S can dramatically improve its performance and handling. By following this guide, you can ensure a successful installation and enjoy a more engaging driving experience.