How to Install a Mbrp Cat-back Exhaust on W205 C63: Step-by-step Guide

by

Installing a MBRP cat-back exhaust on a W205 C63 can enhance your vehicle’s performance and sound. This guide will walk you through the step-by-step process to ensure a successful installation.

Tools and Materials Needed

  • MBRP Cat-Back Exhaust System
  • Socket Set
  • Wrench Set
  • Screwdriver
  • Jack and Jack Stands
  • Safety Glasses
  • Gloves
  • Exhaust Hanger Removal Tool

Preparation

Before starting the installation, ensure your vehicle is parked on a flat surface. Engage the parking brake and wear safety glasses and gloves for protection.

Step 1: Lift the Vehicle

Using a jack, lift the rear of the vehicle and secure it with jack stands. Ensure it is stable before proceeding.

Step 2: Remove the Stock Exhaust

Locate the stock exhaust system. Use a socket and wrench to detach the exhaust from the catalytic converter. Be sure to remove any bolts or clamps holding it in place.

Next, use the exhaust hanger removal tool to detach the hangers from the rubber mounts. Carefully lower the stock exhaust and set it aside.

Step 3: Install the MBRP Cat-Back Exhaust

Begin by positioning the new MBRP exhaust system under the vehicle. Align the inlet pipe with the catalytic converter and secure it using the provided clamps and bolts.

Next, attach the exhaust hangers to the rubber mounts. Ensure that the exhaust is properly aligned and there are no contact points with the chassis.

Step 4: Tighten All Connections

Using your socket set, tighten all bolts and clamps securely. Double-check all connections to ensure there are no leaks.

Step 5: Lower the Vehicle

Once everything is tightened, carefully lower the vehicle back to the ground using the jack.

Step 6: Test the Exhaust

Start the engine and listen for any unusual noises. Check for leaks around the connections. If everything sounds good, take the vehicle for a short drive to experience the new exhaust.

Conclusion

Installing a MBRP cat-back exhaust on your W205 C63 can be a rewarding project that enhances both performance and sound. Follow these steps carefully for a successful installation.