Table of Contents
Installing a Mishimoto catch can on your Ford Mustang EcoBoost can significantly enhance engine performance by reducing harmful carbon buildup. This guide will walk you through the steps to effectively install the catch can and optimize your vehicle’s efficiency.
What You Will Need
- Mishimoto catch can kit
- Socket set
- Wrench set
- Phillips screwdriver
- Flathead screwdriver
- Rags for cleanup
- Protective gloves
Preparation Steps
Before beginning the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and the Mishimoto catch can kit.
Step 1: Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Gently lift the cover off and set it aside in a safe location.
Step 2: Locate the PCV Hose
Identify the Positive Crankcase Ventilation (PCV) hose connected to the intake manifold. This is typically located on the driver’s side of the engine bay.
Step 3: Disconnect the PCV Hose
Carefully disconnect the PCV hose from the intake manifold. You may need to use a flathead screwdriver to gently pry it loose if it is stuck.
Installing the Mishimoto Catch Can
Step 4: Attach the Catch Can Bracket
Using the provided hardware, attach the Mishimoto catch can bracket to a suitable location in the engine bay. Ensure it is secure and does not interfere with any moving parts.
Step 5: Connect the Catch Can
Attach one end of the hose to the catch can and the other end to the PCV connection on the intake manifold. Ensure that the hose is secured with the provided clamps.
Step 6: Route the Hose
Carefully route the hose away from any heat sources or moving components. Ensure that it has no kinks and is properly secured throughout its length.
Step 7: Reconnect the PCV Hose
Reconnect the original PCV hose to the catch can outlet. Again, ensure that it is secured tightly to prevent any leaks.
Finalizing the Installation
Step 8: Reinstall the Engine Cover
Place the engine cover back onto the engine bay and secure it with the previously removed bolts. Ensure that everything is aligned properly.
Step 9: Check for Leaks
Start the engine and let it run for a few minutes. Check for any signs of leaks around the catch can and hoses. If everything looks good, you are ready to go!
Maintenance Tips
To ensure optimal performance, regularly check the catch can for accumulated oil and debris. Empty the catch can as needed, typically every few thousand miles, depending on driving conditions.
Conclusion
Installing a Mishimoto catch can on your Ford Mustang EcoBoost is a straightforward process that can lead to improved engine performance and longevity. By following these steps, you can ensure your vehicle runs smoothly and efficiently for years to come.