How to Install a Mopar Performance Supercharger on Your 6.2 Hellcat

by

Installing a Mopar Performance Supercharger on your 6.2 Hellcat can significantly enhance your vehicle’s performance. This guide will walk you through the necessary steps to ensure a successful installation.

Tools and Materials Needed

  • Socket set
  • Torque wrench
  • Flathead screwdriver
  • Phillips screwdriver
  • Ratchet and extensions
  • Engine hoist (optional)
  • Mopar Performance Supercharger kit
  • New gaskets and seals
  • Coolant
  • Oil for the supercharger

Preparation Steps

Before beginning the installation, ensure that you have a clean and organized workspace. Gather all tools and materials, and read through the installation manual provided with the supercharger kit.

Safety Precautions

Always wear safety glasses and gloves while working on your vehicle. Make sure the engine is cool before starting the installation process. Disconnect the battery to prevent any electrical issues.

Removing the Stock Supercharger

The first step is to remove the stock supercharger. Follow these steps carefully:

  • Disconnect the battery.
  • Remove the engine cover by unscrewing the bolts.
  • Disconnect any electrical connectors attached to the supercharger.
  • Remove the intake ducting and throttle body.
  • Unbolt the stock supercharger from the intake manifold.
  • Carefully lift the supercharger off the engine.

Installing the Mopar Performance Supercharger

Once the stock supercharger is removed, you can begin installing the Mopar Performance Supercharger. Follow these steps:

  • Clean the surface of the intake manifold where the supercharger will sit.
  • Place the new gaskets onto the intake manifold.
  • Carefully position the Mopar supercharger onto the intake manifold.
  • Secure the supercharger with the provided bolts, tightening them to the specified torque settings.
  • Reinstall the throttle body and intake ducting.
  • Reconnect all electrical connectors.

Connecting the Supercharger Components

After the supercharger is securely in place, you need to connect various components:

  • Attach the supercharger inlet and outlet hoses.
  • Connect the intercooler lines if applicable.
  • Install the new fuel injectors as per the kit instructions.
  • Ensure all clamps and connections are tight to avoid leaks.

Final Steps

With the supercharger installed and all components connected, follow these final steps:

  • Refill the coolant system as necessary.
  • Check the oil level in the supercharger and fill if needed.
  • Reconnect the battery.
  • Start the engine and check for any leaks or issues.
  • Allow the engine to idle and monitor the performance.

Tuning Your Hellcat

After installation, it is crucial to tune your Hellcat to ensure optimal performance with the new supercharger. Consider the following:

  • Use a reputable tuning software or service.
  • Adjust the air-fuel ratio for improved performance.
  • Monitor engine parameters closely after tuning.

Conclusion

Installing a Mopar Performance Supercharger on your 6.2 Hellcat can greatly enhance your vehicle’s performance. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.