How to Install a Moroso Short Throw Shifter in Your Mustang Gt: Step-by-step

by

Installing a Moroso short throw shifter in your Mustang GT can significantly improve your driving experience. This guide will walk you through the process step-by-step, ensuring a smooth installation.

Tools and Materials Needed

  • Moroso Short Throw Shifter Kit
  • Socket Set
  • Wrench Set
  • Screwdriver Set
  • Torque Wrench
  • Grease
  • Safety Glasses
  • Gloves

Preparation

Before you begin the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all the tools and materials listed above.

Step 1: Remove the Center Console

Start by removing the center console to access the shifter. Follow these steps:

  • Use a screwdriver to remove any screws securing the console.
  • Carefully lift the console and disconnect any electrical connectors.
  • Set the console aside in a safe location.

Step 2: Remove the Factory Shifter

With the center console out of the way, you can now access the factory shifter:

  • Locate the retaining bolts securing the shifter to the transmission.
  • Use a socket wrench to remove these bolts.
  • Disconnect the shifter linkage and any electrical connectors.
  • Carefully lift the factory shifter out of the vehicle.

Step 3: Install the Moroso Short Throw Shifter

Now it’s time to install the Moroso short throw shifter:

  • Apply a small amount of grease to the shifter’s pivot points.
  • Align the new shifter with the transmission and lower it into place.
  • Reconnect the shifter linkage and any electrical connectors.
  • Secure the shifter with the retaining bolts and tighten them to the manufacturer’s specifications using a torque wrench.

Step 4: Reinstall the Center Console

With the new shifter installed, it’s time to put the center console back:

  • Reconnect any electrical connectors you previously disconnected.
  • Carefully lower the console back into place.
  • Secure the console with screws, ensuring everything is tight and secure.

Step 5: Test the Shifter

Before finishing up, it’s essential to test the new shifter:

  • Start the engine and ensure it is in neutral.
  • Test the shifter for smooth operation through all gears.
  • Check for any unusual noises or resistance.

Conclusion

Installing a Moroso short throw shifter in your Mustang GT is a rewarding project that enhances your driving experience. By following these steps, you can ensure a successful installation and enjoy improved performance on the road.