How to Install a Procharger Supercharger on Your Pontiac Gto: Boost 150 Hp in 3 Hours

by

If you’re looking to significantly boost the horsepower of your Pontiac GTO, installing a ProCharger supercharger can be a fantastic upgrade. With the right tools and a bit of time, you can increase your GTO’s power by 150 HP in just about three hours. This guide will walk you through the steps necessary to complete this installation successfully.

Tools and Materials Needed

  • ProCharger supercharger kit specific for Pontiac GTO
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Fuel line disconnect tool
  • Cooling system flush kit
  • Safety goggles and gloves

Preparation Steps

Before you begin the installation, it’s essential to prepare your workspace and the vehicle. Follow these steps:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent electrical issues.
  • Remove the engine cover if applicable.
  • Drain the coolant from the cooling system.

Removing the Stock Components

To install the ProCharger, you’ll need to remove several stock components. Here’s how:

  • Remove the air intake system, including the air filter and tubing.
  • Disconnect and remove the factory supercharger if applicable.
  • Take off the serpentine belt by loosening the tensioner.
  • Remove any brackets or components obstructing the installation area.

Installing the ProCharger Supercharger

Now that the stock components are out of the way, you can install the ProCharger. Follow these steps carefully:

  • Position the ProCharger bracket onto the engine and secure it using the provided bolts.
  • Install the supercharger unit onto the bracket, ensuring it’s aligned correctly.
  • Connect the inlet and outlet pipes as per the instruction manual.
  • Reinstall the serpentine belt around the supercharger pulley, ensuring proper tension.

Reconnecting Components

With the ProCharger in place, it’s time to reconnect the components you previously removed:

  • Reinstall the air intake system, ensuring all connections are secure.
  • Reconnect any electrical connectors that were unplugged.
  • Refill the cooling system with the appropriate coolant mixture.
  • Reconnect the negative battery terminal.

Final Steps and Testing

After everything is reconnected, it’s essential to perform a few final checks and tests:

  • Check all bolts and connections for tightness.
  • Start the engine and listen for any unusual sounds.
  • Check for leaks in the cooling system and air intake.
  • Take the car for a test drive to ensure everything is functioning correctly.

Conclusion

Installing a ProCharger supercharger on your Pontiac GTO can be a rewarding project that delivers substantial power gains. By following these steps, you can boost your vehicle’s horsepower and enjoy an enhanced driving experience. Always refer to the specific ProCharger instructions for your model for the best results.