How to Install a Racingbeat Exhaust on Your Fc Rx-7 for Improved Performance

by

The FC RX-7 is a beloved sports car, known for its lightweight design and rotary engine performance. One of the best upgrades you can make to enhance its performance is installing a RacingBeat exhaust system. This article will guide you through the steps to install a RacingBeat exhaust on your FC RX-7, ensuring you achieve improved performance and a more exhilarating driving experience.

Tools and Materials Needed

  • RacingBeat Exhaust System
  • Socket set
  • Wrench set
  • Jack and jack stands
  • Safety glasses
  • Gloves
  • Penetrating oil

Before you begin the installation, gather all the necessary tools and materials. Having everything ready will make the process smoother and more efficient.

Preparation Steps

Preparation is key to a successful installation. Follow these steps to ensure you are ready to start the installation process.

  • Park your FC RX-7 on a flat surface.
  • Engage the parking brake to prevent any movement.
  • Use the jack to lift the rear of the vehicle and secure it with jack stands.
  • Inspect the existing exhaust system for any rust or damage.

Removing the Old Exhaust System

Before installing the RacingBeat exhaust, you need to remove the old exhaust system. Follow these steps carefully.

  • Start by spraying penetrating oil on the exhaust bolts to loosen them.
  • Using the socket set, remove the bolts securing the exhaust to the manifold.
  • Disconnect the exhaust hangers using a wrench.
  • Carefully lower the old exhaust system from the vehicle.

Installing the RacingBeat Exhaust

Now that the old exhaust system is removed, it’s time to install the new RacingBeat exhaust. Follow these steps for a successful installation.

  • Position the new exhaust system under the vehicle.
  • Align the exhaust pipes with the manifold and hangers.
  • Secure the exhaust to the manifold using the provided bolts.
  • Reconnect the exhaust hangers to their original positions.
  • Ensure all connections are tight and secure.

Final Checks and Testing

After the installation is complete, it’s crucial to perform some final checks before taking your FC RX-7 for a spin.

  • Double-check all bolts and connections to ensure they are tight.
  • Lower the vehicle from the jack stands.
  • Start the engine and listen for any unusual noises.
  • Check for any exhaust leaks by feeling for air around the joints.

Conclusion

Installing a RacingBeat exhaust on your FC RX-7 is a straightforward process that can significantly enhance your vehicle’s performance. With the right tools and careful attention to detail, you can enjoy the benefits of improved sound and power. Take pride in your upgrade, and enjoy your enhanced driving experience!