Table of Contents
Installing a rigid suspension system on your Acura TLX Type S can enhance handling and performance. This step-by-step guide will help you through the installation process, ensuring that you achieve optimal results.
Tools and Materials Needed
- Jack and jack stands
- Socket set
- Wrench set
- Torque wrench
- Suspension system kit
- Brake cleaner
- Lubricant
Before starting the installation, gather all necessary tools and materials. This will streamline the process and prevent interruptions.
Preparation
Begin by parking your Acura TLX Type S on a flat surface. Engage the parking brake and ensure the vehicle is secure before lifting it with a jack.
Lift the Vehicle
Use the jack to lift the front or rear of the vehicle, depending on which suspension components you are replacing. Place jack stands under the vehicle to ensure stability.
Removing the Old Suspension
With the vehicle securely lifted, you can begin removing the old suspension components. Start with the wheels, then proceed to the suspension system.
Remove the Wheels
Using a socket set, remove the lug nuts and take off the wheels. This will give you access to the suspension components.
Unbolt the Old Suspension
Locate the bolts securing the old suspension system. Use the appropriate wrench to remove these bolts. Keep them in a safe place in case you need them later.
Installing the New Rigid Suspension
With the old suspension removed, it’s time to install the new rigid suspension system. Follow these steps carefully to ensure proper installation.
Position the New Components
Align the new suspension components with the mounting points on your Acura TLX Type S. Make sure that they are properly positioned before securing them.
Secure the Suspension
Using the original bolts or new ones provided in the suspension kit, secure the components in place. Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
Reinstalling the Wheels
Once the new suspension is installed, it’s time to put the wheels back on. This step is crucial for ensuring that the vehicle can be safely lowered back to the ground.
Attach the Wheels
Position each wheel back onto the hub and hand-tighten the lug nuts. Ensure that they are aligned correctly before fully tightening them with a socket wrench.
Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once the vehicle is on the ground, remove the jack stands.
Final Checks and Adjustments
After installation, it’s essential to perform final checks and adjustments to ensure everything is functioning correctly.
Check for Loose Components
Inspect all bolts and components to ensure they are tight and secure. A loose suspension can lead to serious issues while driving.
Test Drive
Take your Acura TLX Type S for a test drive to evaluate the performance of the new suspension. Pay attention to handling and ride quality.
Conclusion
Installing a rigid suspension system on your Acura TLX Type S can greatly improve handling and performance. By following this step-by-step guide, you can ensure a successful installation and enjoy enhanced driving experiences.