Table of Contents
The installation of a Skunk2 camshaft on your Honda Prelude H22 can significantly enhance power delivery and overall engine performance. This guide will walk you through the steps necessary to install this performance upgrade effectively.
Tools and Materials Needed
- Skunk2 camshaft
- Socket set
- Torque wrench
- Engine oil
- Camshaft installation tool
- Gasket scraper
- New camshaft seals
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation process, ensure that you have a clean workspace and all necessary tools at hand. Here are the preparation steps:
- Disconnect the battery to prevent electrical issues.
- Remove the engine cover and any components obstructing access to the camshaft.
- Drain the engine oil to avoid spills during installation.
Removing the Old Camshaft
The next step is to remove the old camshaft from your Prelude H22. Follow these instructions:
- Remove the timing belt cover and timing belt.
- Loosen the camshaft bearing caps using the socket set.
- Carefully lift the old camshaft out of the engine block.
- Inspect the old camshaft for wear and damage.
Installing the Skunk2 Camshaft
With the old camshaft removed, you can now install the Skunk2 camshaft. Follow these steps:
- Apply a thin layer of engine oil on the new camshaft bearings.
- Carefully place the Skunk2 camshaft into the engine block.
- Align the camshaft with the timing marks on the engine.
- Replace the camshaft bearing caps and tighten them to the manufacturer’s specifications using a torque wrench.
Reassembling the Engine
After the camshaft is installed, reassemble the engine components that were removed. Here’s how:
- Reinstall the timing belt and timing belt cover.
- Replace any gaskets that were removed, ensuring a proper seal.
- Reconnect any electrical connections and hoses that were detached.
- Replace the engine cover.
Final Steps
Once the engine is reassembled, there are a few final steps to complete the installation:
- Refill the engine with fresh oil.
- Reconnect the battery.
- Start the engine and check for any leaks or unusual noises.
- Take the vehicle for a test drive to experience the improved power delivery.
Conclusion
Installing a Skunk2 camshaft on your Honda Prelude H22 is a rewarding project that can lead to significant performance enhancements. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of better power delivery.