Table of Contents
The Acura Integra Type R is a beloved car among enthusiasts, known for its performance and handling. Upgrading to a Skunk2 Racing Exhaust can enhance its power and sound. This guide will walk you through the installation process step-by-step, along with a cost breakdown to help you budget for this upgrade.
Tools and Materials Needed
- Skunk2 Racing Exhaust System
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Safety glasses
- Gloves
- Penetrating oil
Before starting the installation, ensure you have all the necessary tools and materials. This will make the process smoother and more efficient.
Preparation
Begin by preparing your workspace. Park your Acura Integra Type R on a flat surface and engage the parking brake. Allow the car to cool down if it has been recently driven.
Next, gather your tools and materials. Having everything on hand will minimize interruptions during the installation process.
Step 1: Lift the Vehicle
Using a jack, lift the front of the vehicle and secure it with jack stands. This will provide you with enough clearance to work underneath the car safely.
Step 2: Remove the Old Exhaust
Before removing the old exhaust, spray the bolts with penetrating oil to help loosen them. Allow it to sit for a few minutes.
Start by disconnecting the exhaust from the header. Use the socket set to remove the bolts holding the exhaust in place. Carefully detach the exhaust system from the hangers, and lower it to the ground.
Step 3: Install the Skunk2 Racing Exhaust
Begin by positioning the Skunk2 Racing Exhaust under the car. Align it with the header and secure it with the provided bolts. Make sure to attach the exhaust to the hangers for support.
Once everything is in place, use a torque wrench to tighten the bolts to the manufacturer’s specifications. This will ensure a secure fit and prevent any leaks.
Step 4: Check for Leaks
After the installation, start the engine and let it run for a few minutes. Check for any exhaust leaks by listening for unusual sounds or looking for any visible exhaust fumes.
Step 5: Lower the Vehicle
Once you have confirmed there are no leaks, turn off the engine and carefully lower the vehicle back to the ground. Remove the jack stands and ensure everything is secure.
Cost Breakdown
Understanding the cost involved in installing a Skunk2 Racing Exhaust can help you plan your budget effectively. Below is a breakdown of the expected costs:
- Skunk2 Racing Exhaust System: $500 – $700
- Tools (if not already owned): $100 – $200
- Labor (if using a shop): $100 – $200
- Miscellaneous (bolts, penetrating oil, etc.): $20 – $50
Overall, the total cost can range from approximately $720 to $1,150, depending on whether you choose to do it yourself or hire a professional.
Conclusion
Installing a Skunk2 Racing Exhaust on your Acura Integra Type R can significantly enhance its performance and sound. By following this step-by-step guide, you can complete the installation with confidence. Remember to budget for the costs involved and enjoy the benefits of your new exhaust system!