How to Install a Supercharger Kit from Hpe900 on Challenger Scat Pack for 250+ Hp Gains

by

Installing a supercharger kit can significantly enhance your vehicle’s performance, particularly for the Challenger Scat Pack. The HPE900 supercharger kit is designed to provide over 250 horsepower gains, transforming your driving experience. In this article, we will guide you through the steps to install the HPE900 supercharger kit on your Challenger Scat Pack.

Tools and Materials Needed

  • HPE900 Supercharger Kit
  • Socket set
  • Wrenches
  • Torque wrench
  • Ratchet and extensions
  • Flathead and Phillips screwdrivers
  • Gasket scraper
  • Engine oil
  • Coolant
  • Fuel injector cleaner
  • Safety glasses
  • Mechanic gloves

Preparation Steps

Before starting the installation process, it is essential to prepare your workspace and vehicle. Here are the steps to follow:

  • Ensure the vehicle is parked on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Gather all tools and materials needed for the installation.
  • Read through the HPE900 installation manual thoroughly.

Removing the Stock Components

The next step involves removing the stock components to make way for the supercharger kit. Follow these instructions:

  • Remove the engine cover by unscrewing the bolts holding it in place.
  • Disconnect the throttle body and intake manifold connections.
  • Take off the stock air intake system.
  • Remove the stock fuel injectors and fuel rail.
  • Drain the coolant from the system.

Installing the HPE900 Supercharger Kit

Now that the stock components are removed, you can begin installing the HPE900 supercharger kit. Follow these steps:

  • Install the new fuel injectors onto the fuel rail.
  • Attach the fuel rail and injectors back onto the engine.
  • Install the new supercharger assembly onto the intake manifold.
  • Connect the throttle body to the new supercharger.
  • Install the new air intake system that comes with the kit.
  • Connect all hoses and electrical connections as per the installation manual.

Finalizing the Installation

Once the supercharger kit is installed, it’s time to finalize the installation process. Here are the steps to complete:

  • Reinstall the engine cover and secure it with bolts.
  • Refill the coolant in the system.
  • Reconnect the battery.
  • Start the engine and check for any leaks or issues.
  • Allow the engine to idle and monitor the performance.

Tuning Your Vehicle

After installing the supercharger, tuning your vehicle is crucial to ensure optimal performance. Here’s how to proceed:

  • Use a professional tuning service to adjust the engine’s fuel maps.
  • Monitor air-fuel ratios and adjust as needed.
  • Perform a dyno test to verify horsepower gains.
  • Make necessary adjustments based on performance results.

Maintenance Tips

To keep your supercharged Challenger Scat Pack running smoothly, regular maintenance is essential. Consider the following tips:

  • Regularly check and change the engine oil.
  • Inspect and replace air filters as needed.
  • Monitor coolant levels and top off as required.
  • Check for any loose connections or leaks periodically.
  • Schedule routine dyno checks to ensure performance is maintained.

Conclusion

Installing the HPE900 supercharger kit on your Challenger Scat Pack can lead to impressive horsepower gains and an exhilarating driving experience. By following the steps outlined in this guide, you can ensure a successful installation and maintain your vehicle for optimal performance.